RMC No. 42-2019 required re-application of January 2019 CRM, POS, SPM, and sales machine PTUs by April 12, 2019 through eAccReg.
Businesses that obtained Permits to Use for cash register machines, point-of-sale machines, special purpose machines, or other sales machines with effective dates from January 3 to 31, 2019 were required to re-apply through the BIR eAccReg System on or before April 12, 2019. Failure to re-submit the application was treated as non-registration of the affected machine or software, exposing the taxpayer-user, accredited supplier, or pseudo-supplier to penalties under existing revenue issuances.
What RMC No. 42-2019 Changed
RMC No. 42-2019 mandated a special re-application process for the registration of Cash Register Machines, or CRMs, Point-of-Sale machines, or POS machines, Special Purpose Machines, or SPMs, and other sales machines or software with Permits to Use issued for the month of January 2019. The issuance was necessary because technical problems affected the Enhanced and Integrated Electronic Accreditation and Registration System, commonly known as the eAccReg System, for transactions from January 3 to 31, 2019.
The key change was not a new tax rate, but a registration compliance requirement. Even if a taxpayer or supplier had already obtained a Permit to Use during the affected period, the BIR required a fresh re-submission of the registration application through the eAccReg System. This applied because the BIR treated the affected January 2019 transactions as needing validation and correction through the electronic system.
For accountants and business owners searching for BIR POS machine registration January 2019, re-application of Permit to Use, eAccReg PTU re-submission, CRM registration Philippines, or sales machine BIR compliance, the practical point is straightforward: an existing PTU issued during the affected January 2019 period was not enough. The taxpayer had to go back into the BIR process and re-submit the application by the stated deadline.
Who Was Affected
RMC No. 42-2019 applied to accredited suppliers, pseudo-suppliers, and taxpayer-users of CRMs, POS machines, SPMs, and other sales machines or software. This includes businesses that issue receipts or sales invoices through registered sales machines, such as retailers, restaurants, service businesses, pharmacies, groceries, hospitality operators, and other enterprises using machine-generated receipts or invoices.
The coverage was specific but broad within the January 2019 affected period. It covered all applications filed from January 3 to 31, 2019. It also covered applications with issued Permits to Use for sales machines or special purpose machines within that same period, regardless of whether the application was processed manually under workaround procedures during system downtime or electronically through the eAccReg System.
The requirement also covered taxpayers with PTUs issued before the implementation of RMC No. 42-2019 if the PTU reflected an effective date between January 3 and 31, 2019. This detail mattered because some businesses may have assumed that a previously issued PTU was already final. Under the circular, the effective date of the PTU was the key trigger for compliance.
Key Compliance Deadline: April 12, 2019
The central deadline under RMC No. 42-2019 was April 12, 2019. Re-submission of applications through the eAccReg System had to be completed on or before that date. The circular expressly stated that failure to comply with the re-application requirement would be tantamount to non-registration of the concerned CRMs, POS machines, SPMs, and other sales machines.
For businesses, this meant that continued use of an affected machine without completing the required re-application could create exposure similar to operating an unregistered machine. In tax compliance terms, this is serious because sales machines are part of the BIRβs control mechanism for the issuance of receipts, sales invoices, and sales reporting.
New PTU Details Must Be Reflected in the Machine or Software
Once the new Permit to Use was successfully obtained through the eAccReg System, the accredited supplier, pseudo-supplier, or taxpayer-user had to make the necessary modifications or reconfigurations to the machine or software. The machine or software had to reflect the new PTU number and the Machine Identification Number, or MIN, including the validity date on the receipts or invoices generated from the affected CRM, POS machine, SPM, or other sales machine.
This requirement is operationally important. It was not enough to merely secure the new PTU electronically. The receipt or invoice output also had to match the updated BIR registration details. Businesses using POS systems should therefore have coordinated with their software provider, machine supplier, or internal IT team to ensure that the new PTU number, MIN, and validity details appeared correctly on receipts and invoices.
Do Not Reset Sales Machines to Zero
RMC No. 42-2019 specifically prohibited resetting or adjusting the covered machines to zero. All CRMs, POS machines, SPMs, and other sales machines covered by the circular had to retain their accumulated data. The Accumulated Grand Total Sales, the last Official Receipt or Sales Invoice number issued, and the Date of Reading recorded in the Z-reading report as of the day immediately preceding the re-application date had to be declared or reported during the PTU application.
The circular gave an example where a corporation registered a cash register machine on January 20, 2019 and re-applied on March 21, 2019. The information to be reported included Total Accumulated Sales of Php 510,132.00 and Last Official Receipt No. 000129. This example shows that the BIR expected continuity of machine records, not a fresh start. For CFOs and accountants, the compliance risk was the possible mismatch between machine readings, sales reports, receipts issued, and the re-application details submitted in eAccReg.
Surrender of Previously Issued Permit
After receiving or printing the new PTU, the previously issued permit had to be surrendered within fifteen days. The surrender had to be made to the Revenue District Office having jurisdiction over the taxpayer-userβs place of business. This rule applied whether the previous permit had been issued manually or electronically.
This fifteen-day surrender requirement is easy to overlook but important for documentation. Businesses should have retained proof that the old permit was surrendered to the correct RDO, including receiving copies, transmittal records, or other evidence of compliance. In a later tax audit, post-evaluation, or BIR inspection, the taxpayer may need to show that the old PTU was not merely replaced internally but was properly surrendered to the BIR.
eSales Reporting Must Use the New MIN
RMC No. 42-2019 also required compliance with mandatory sales reporting through the eSales System every 8th or 10th day of the month, whichever was applicable. After the new PTU was generated, the sales reports had to be submitted using the new Machine Identification Number appearing in the new PTU.
This is a crucial point for recurring compliance. The re-application process did not end with issuance of the new PTU. The taxpayer also had to ensure that future eSales submissions used the correct new MIN. A business that continued reporting under old or incorrect machine details could create compliance discrepancies between its receipts, Z-readings, machine registration records, and BIR eSales reports.
Penalties and Compliance Risk
The circular identified two major compliance consequences. First, failure to comply with the April 12, 2019 re-application requirement would be treated as non-registration of the affected CRMs, POS machines, SPMs, and other sales machines, subject to penalties under existing revenue issuances. Second, failure to submit the required sales reports through the eSales System using the new MIN would be subject to the existing penalty for non-submission of sales reports.
The circular also stated that non-submission of the sales report would be a ground for the BIR to prioritize the machine for post-evaluation. For businesses, this means the risk is not limited to a fixed penalty. Non-compliance may also invite closer BIR review of the CRM, POS machine, SPM, or sales software, including whether the machine is properly registered and whether sales are properly reported.
Practical Steps for Businesses
Businesses affected by RMC No. 42-2019 should have confirmed whether any CRM, POS machine, SPM, or other sales machine had a PTU effective date from January 3 to 31, 2019. They should also have checked whether the application was filed during that period, whether manually under downtime workaround procedures or electronically through eAccReg.
For each affected machine, the taxpayer-user or supplier should have re-submitted the application through the eAccReg System by April 12, 2019, preserved the Z-reading immediately preceding the re-application date, reported the accumulated grand total sales, last official receipt or sales invoice number, and date of reading, obtained the new PTU, updated the machine or software output to reflect the new PTU number, new MIN, and validity date, surrendered the old PTU to the proper RDO within fifteen days from receipt or printing of the new PTU, and used the new MIN in future eSales submissions every 8th or 10th day of the month, whichever applied.
Why This Still Matters in BIR Audits
Although RMC No. 42-2019 addressed a specific January 2019 eAccReg system issue, it remains relevant in audit and due diligence work. A business with old POS records, historical BIR registration issues, or missing PTU documents may still be asked to explain whether its sales machines were properly registered, whether old permits were surrendered, and whether eSales reports matched the correct MIN.
For buyers conducting tax due diligence, internal auditors reviewing POS compliance, or businesses preparing for BIR examination, RMC No. 42-2019 is a reminder that machine registration compliance is part of tax risk management. A valid-looking receipt format is not always enough. The underlying PTU, MIN, Z-reading continuity, and eSales reporting trail must also be consistent.
ASG Law Can Help With BIR POS, CRM, and eSales Compliance
Ablola, Saribong & Gueco assists businesses in reviewing BIR registration compliance, POS and CRM documentation, Permit to Use issues, eSales reporting obligations, and tax audit risk. For companies with historical PTU gaps, missing machine registration records, or concerns about BIR post-evaluation, early legal and tax review can prevent a technical issue from becoming an assessment or enforcement problem.
For assistance with BIR compliance, tax audit preparation, POS machine registration issues, or corporate tax risk review, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.