RMC No. 19-2009 sets eAccReg transition rules for BIR Permit to Use issuance, reprinting, cancellation, and post-evaluation of CRM, POS, and SPM machines.

Businesses using cash register machines, point-of-sale machines, special purpose machines, and similar sales machines must make sure that each machine has its own clearly visible BIR Permit to Use, and taxpayer-users must follow the new decentralized eAccReg procedures for issuance, reprinting, cancellation, and post-evaluation of permits. RMC No. 19-2009 is especially important for retailers, restaurants, service businesses, large taxpayers with branches, accredited POS suppliers, and any taxpayer relying on CRM/POS/SPM systems to issue receipts or invoices.

What Changed Under RMC No. 19-2009

RMC No. 19-2009 prescribed transition procedures for the issuance and cancellation of Permit to Use Cash Register Machine, Point of Sales Machine, Special Purpose Machine, and other similar sales machines. The most important change is the decentralization and devolution of the registration, issuance, and cancellation of these permits through the Electronic Accreditation and Registration System, or eAccReg System, to the Revenue District Offices through their Taxpayer Service Sections, as well as to LTAD I, LTAD II, LTDOs, and other concerned BIR offices.

The circular also addresses a practical compliance problem. Earlier permits sometimes listed more than one machine on a single page, even if each machine had its own Permit Number and Machine Identification Number. Because RR No. 11-2004 and RMO No. 10-2005 require the original Permit to Use to be posted at the back of the CRM, POS, SPM, or similar machine, the old format made full compliance difficult. RMC No. 19-2009 therefore requires all permits issued before the circular to be reprinted so that only one machine appears on each page of the permit.

Who Is Affected

The ruling affects taxpayer-users of cash register machines, point-of-sale machines, special purpose machines, and other similar sales machines. This includes retail businesses, restaurants, pharmacies, convenience stores, service establishments, franchised branches, large taxpayers operating multiple sites, and businesses with computerized sales receipting systems.

It also affects accredited suppliers, pseudo suppliers, and taxpayer-users applying for permits for accredited machines, non-accredited machines, and special purpose machines. Large taxpayers must pay particular attention because the ruling distinguishes between head office jurisdiction under LTAD I, LTAD II, or LTDOs and branch jurisdiction under the appropriate RDOs. For accounting teams and CFOs, searchable compliance concerns include BIR Permit to Use POS machine, CRM registration Philippines, eAccReg Permit to Use, cancellation of POS machine permit, and provisional Permit to Use sales machine.

Reprinting of Existing Permits

For permits issued before RMC No. 19-2009, the concerned LTAD I, LTAD II, LTDO, or RDO Taxpayer Service Section must reprint individual permits using the prescribed format and size. The Information Systems Operations Service-Systems Operations Division must extract the list of valid and existing permits, whether final or provisional, within fifteen days from the effectivity of the circular, based on the relevant RDO or office code.

Once the list is received electronically, the concerned office must reprint all permits within thirty days from receipt of the list. The newly reprinted Permit to Use must then be signed or approved by the Chief of LTAD I, LTAD II, LTDO, or the Revenue District Officer. Taxpayer-users or accredited suppliers must claim the reprinted permit, surrender the old Permit to Use, and attach the new permit to the specific CRM, POS, SPM, or similar machine in a manner clearly visible to the public.

The concerned BIR offices must also prepare a monthly report on reprinted permits and submit it to the Taxpayer Service Programs and Monitoring Division through tspmd_tas@bir.gov.ph
every tenth day of the following month until all taxpayers in the list have received the reprinted permits.

Issuance of Permit to Use for Accredited Machines

For accredited machines, the RDO, LTAD, or LTDO of the accredited supplier’s or pseudo supplier’s head office receives the application for Permit to Use through supplier.csv sent by email. The office must validate the application under the eAccReg System and process the Permit to Use within three working days from receipt of the application if all information is correct.

If the application is valid, the eAccReg System generates the Permit Number and Machine Identification Number for each machine. The processed application is then forwarded by email to the accredited supplier, with a copy to the RDO, LTAD, or LTDO having jurisdiction over the taxpayer-user’s place of business or registered address. The taxpayer-user’s BIR office verifies the Permit Number and Machine Identification Number, prints the permit for each machine using the prescribed format, obtains the proper signature or approval, and releases the permit. The taxpayer-user must attach the permit and decal to the specified machine in a place clearly visible to the public.

Provisional Permit to Use for Non-Accredited Machines

For non-accredited machines, taxpayer-users must apply for a Provisional Permit to Use by email to the appropriate LTAD, LTDO, or RDO. The application must include a scanned Sworn Statement and the List of Sales Machines for Registration in taxpayer-user.csv format. The BIR office must validate the information and process the Provisional Permit to Use within three working days from receipt of the application if the information is complete and correct.

The BIR office generates the Provisional Permit Number and Machine Identification Number, prints the Provisional Permit to Use for each machine, obtains the required signature or approval, and releases the permit upon submission of the original Sworn Statement. The taxpayer-user must attach the provisional permit and decal to the specific CRM, POS, or similar sales machine in a place clearly visible to the public.

Permit to Use for Special Purpose Machines

For Special Purpose Machines, taxpayer-users must submit the application by email using special purpose machine.csv. The concerned LTAD, LTDO, or RDO validates the application through the eAccReg System and processes the Permit to Use Special Purpose Machine within three working days from receipt if the application is correct. The office then generates the Permit Number, prints the permit using the prescribed format, obtains approval, and releases the permit to the taxpayer-user. The taxpayer-user must attach the permit and sticker to the specific Special Purpose Machine or similar machine in a way that is clearly visible to the public.

Cancellation of Permit to Use

Taxpayer-users must notify the concerned RDO, LTDO, LTAD I, or LTAD II in writing when requesting cancellation of a Permit to Use. The notice must be made within fifteen days from the date the machine was last used or withdrawn from use. The written request must state the reason for cancellation and must include necessary machine details such as the Permit Number, Machine Identification Number if any, Machine Accreditation Number if any, type of machine, brand or model, software name or version, and serial number.

After receiving the written notice, the concerned BIR office must contact the taxpayer-user and conduct an actual inspection within five working days from receipt of the notice. During inspection, the BIR checks the machine specifications and permit details, requests or generates the Z-reading as of the last date of use, requests or generates the back-end accumulated sales report for POS or checks the CRM Sales Book for CRM, matches the reading against the back-end report, and resets the machine to zero or initializes it. The BIR then prepares a memorandum report, cancels the Permit to Use and Machine Identification Number from the database, generates a Certificate of Cancellation, and requires surrender of the original cancelled permit.

Post-Evaluation of Provisional Permits

All Provisional Permits to Use must be post-evaluated by the concerned RDO, LTDO, LTAD I, or LTAD II within three months from the date of issuance. If post-evaluation is not done within that period, the provisional permit remains valid until post-evaluated. The post-evaluation includes inspection of the machine, actual systems demonstration, determination of compliance with Section 5.0 of RR No. 11-2004, verification that receipts or invoices contain the complete data required by Section 6.0 of RR No. 11-2004, and use of the applicable evaluation checklist under RMO No. 10-2005.

If the machine is compliant, the provisional permit may be converted to a final Permit to Use through the eAccReg System. If the machine is not yet compliant, the taxpayer-user must reconfigure, enhance, upgrade, or modify the machine. For existing provisional permits issued before the approval of RMC No. 19-2009, non-compliant taxpayer-users are given three months from the approval and effectivity of the circular, extendible only once for another three months upon written request. For newly issued provisional permits, the taxpayer-user must comply within three months from issuance, also extendible only once for another three months upon written request.

Penalties and Consequences for Non-Compliance

RMC No. 19-2009 does not state a new monetary penalty rate. However, it imposes a serious compliance consequence for non-compliant machines under provisional permits. If the taxpayer-user fails to reconfigure, enhance, upgrade, or modify the CRM, POS, or similar sales machine within the allowed period and any approved one-time extension, the Provisional Permit to Use will be automatically revoked if BIR requirements are not complied with.

For businesses, automatic revocation is not a mere paperwork issue. A revoked provisional permit can create operational risk because the affected machine may no longer be properly authorized for use in sales recording and receipting. Taxpayers should therefore treat POS machine permit compliance, eAccReg registration, and BIR sales machine post-evaluation as part of their tax compliance calendar.

Practical Steps for Businesses

Businesses should immediately inventory all CRM, POS, SPM, and similar machines by branch, machine type, serial number, Permit Number, Machine Identification Number, software name, and permit status. They should confirm whether old permits list multiple machines on one page and coordinate with the appropriate RDO, LTAD, or LTDO for reprinted permits. Each machine should have its own Permit to Use posted at the back or otherwise attached as required, clearly visible to the public.

Taxpayer-users applying for new permits should prepare the correct CSV file and supporting documents depending on whether the machine is accredited, non-accredited, or a Special Purpose Machine. For non-accredited machines, the scanned Sworn Statement and original Sworn Statement upon claiming the Provisional Permit to Use must be ready. For machines withdrawn from use, the written cancellation notice must be filed within fifteen days from last use or withdrawal.

Accounting, tax, and operations teams should also monitor the three-working-day processing expectation for complete applications, the fifteen-day deadline for cancellation requests, the five-working-day inspection period after cancellation notice, and the three-month post-evaluation period for provisional permits. Businesses with many branches should centralize monitoring so that head office finance and tax teams know which branches have final permits, provisional permits, cancelled permits, and machines awaiting post-evaluation.

ASG Law Can Help With BIR Permit to Use and POS Compliance

Ablola, Saribong & Gueco advises Philippine businesses on BIR registration, POS and CRM Permit to Use compliance, tax audit readiness, branch compliance, and documentation of sales machine authorizations. For retailers, restaurants, service companies, franchise operators, and large taxpayers, RMC No. 19-2009 is a reminder that sales machine compliance must be handled before problems arise during inspection, audit, cancellation, or system migration. For assistance with BIR Permit to Use applications, eAccReg compliance, cancellation of POS permits, and tax compliance planning, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *