RMO No. 45-2011 sets BIR rules for pre-repair inspection, delivery acceptance, IAC reports, COA witnessing, and the 30% repair-cost economy test.
BIR offices, suppliers, contractors, and personnel involved in repairs, renovations, rehabilitation work, goods deliveries, and services must follow formal pre-repair inspection and inspection-and-acceptance procedures before repair work, procurement acceptance, and payment documentation can properly move forward. RMO No. 45-2011 matters because it sets the internal control steps for determining whether repairs are necessary, whether repair costs are economical, whether delivered items match the approved Purchase Order, Job Order, Agency Procurement Request, Request for Printing and Binding, contract, delivery receipt, sales invoice, service invoice, or charge invoice, and whether accountable officers have complied with documentation and waste-material turnover requirements.
What RMO No. 45-2011 Changed
RMO No. 45-2011 prescribed the guidelines and procedures for two related BIR control processes: pre-repair inspection and inspection and acceptance of deliveries of goods and services. The issuance applies to IT equipment, non-IT equipment, vehicles, building facilities, goods delivered, and services rendered to the Bureau of Internal Revenue.
The most important rule is that repair, rehabilitation, renovation, delivery acceptance, and related documentation must pass through the proper Inspection and Acceptance Committee or IAC process. For pre-repair matters, inspection is conducted only after receipt of a duly accomplished Request for Pre-Repair Inspection. For delivery matters, actual inspection is conducted only after receipt of a duly accomplished Request for Inspection from the proper General Services, Administrative Division, or Administrative Section officer.
The order also makes clear that inspection is not a mere clerical step. It is an internal safeguard against short deliveries, substandard goods, unnecessary repairs, uneconomical repairs, and unsupported acceptance of services. The IAC Report must state the items actually inspected and must contain conclusive remarks on the findings and recommendation. If the quantity, specifications, or completeness of delivery is not in order, the report must note that the delivery is not in conformity with the approved procurement or contract documents.
Who Is Affected
RMO No. 45-2011 directly affects BIR officials and employees involved in procurement, property management, repairs, facilities management, IT support, supply, accounting, and regional administration. It is particularly relevant to the Procurement Division, General Services Division, Administrative Divisions, Collection Divisions, Revenue District Offices, project proponents, requisitioning units, and the Inspection and Acceptance Committee.
Suppliers, service providers, contractors, and repair vendors dealing with the BIR are also practically affected because acceptance of their goods or services depends on inspection, documentation, conformity with approved specifications, and proper signing of delivery and invoice documents. A supplier cannot expect inspection to be performed at its own premises as a general rule. Inspection must generally be made at the site specified in the order after the deliveries have been duly accepted by the Bureau. Inspection in the supplier’s premises is prohibited unless covered by an exceptional arrangement through a Memorandum of Agreement between the Bureau and the supplier, approved by the Commission on Audit.
Inspection and Acceptance Committee Structure
For the National Office, the Inspection and Acceptance Committee is chaired by the Assistant Commissioner of the Policy and Planning Service. Its members are the Chief of the Procurement Division, the Chief of the General Services Division, and the concerned Project Proponent.
For Revenue Regional Offices, the committee is chaired by the Chief of the Special Investigation Division. Its members are the Assistant Chief of the Administrative Division, the Assistant Chief of the Collection Division, and the concerned Project Proponent.
RMO No. 45-2011 also creates an IAC Sub-Committee for far-flung or remote areas, specifically Island District Offices and District Offices requiring travel by land of at least four hours from Regional Offices. The sub-committee is chaired by the Assistant Revenue District Officer, with the Section Chief of the Administrative Section, the Section Chief of the Collection Section, and the Revenue District Officer as Project Proponent serving as members.
Key Pre-Repair Inspection Requirements
Pre-repair inspection applies to IT and non-IT equipment, vehicles, and building facilities requested for repair, rehabilitation, or renovation. It is conducted only upon receipt of a duly accomplished Request for Pre-Repair Inspection. The requisitioning unit generally prepares the Request for Pre-Repair Inspection and Purchase Request, except for building facilities, where the General Services Division in the National Office or Administrative Division in the Revenue Region prepares the documents. For island districts, the Administrative Section of the Revenue District Office prepares the request and purchase documents.
A major compliance point is the economic test for repairs. The Procurement Division, Collection Division, or Collection Section must check whether the cost of repair is economical, meaning it must not be greater than 30% of the current market price, based on COA Circular No. 85-55A. This 30% threshold is critical for BIR repair procurement compliance because it determines whether repair should proceed or whether the expenditure may be considered uneconomical.
The process also requires verification of government ownership through the property card, determination of the necessity and extent of repair, identification of whether the breakdown was due to fair wear and tear or negligence, and confirmation of whether the property is still covered by warranty.
Pre-Repair Deadlines and Processing Times
For IT equipment and facilities, the Help Desk of the System Support Division must prepare, sign, and attach the Service Report to the Request for Pre-Repair Inspection and forward it to the IAC member within one working day from the conduct of actual pre-repair inspection.
For non-IT equipment, vehicles, and building facilities, the concerned IAC member from the General Services Division, Administrative Division, or Administrative Section must forward the documents within three working days from actual pre-repair inspection. For major repairs amounting to ₱500,000.00 and below that require drawings, layout, and estimates, the period is fifteen working days.
The Procurement Division, Collection Division, or Collection Section must conduct actual pre-repair inspection or evaluation together with the representative of the IAC Chairman within one working day from receipt of the Pre-Repair Inspection Report. The same office must submit the report to the IAC Chairman for approval within one working day. The IAC Chairman must conduct inspection or evaluation within one working day from receipt, approve the Pre-Repair Inspection Report within one working day, and forward it with the Purchase Request to the Assistant Commissioner for Administrative Service or the Regional Director, or their duly authorized representative.
Inspection of Deliveries: What Must Be Checked
For delivered goods and rendered services, the IAC must inspect and verify quantity and conformity with specifications based on the delivery receipt, sales invoice, service invoice, charge invoice, and the approved Purchase Order, Job Order, Agency Procurement Request, Request for Printing and Binding, contract, or other controlling document.
The IAC representative must sign over printed name and indicate the date of inspection on the original delivery receipt, sales invoice, service invoice, or charge invoice. The General Services Division, Administrative Division, or Administrative Section must stamp the original document as inspected and ensure that the inspectors sign and date the document.
For purchases below ₱15,000.00 paid out of the Petty Cash Fund by an authorized special disbursing officer, or advanced by an official in the National Office, Regional Office, or Revenue District Office authorized to buy supplies or materials from cash advances, inspection is conducted by the Chairman of the Inspection and Acceptance Committee only. The inspection must be indicated on the face of the invoice or delivery receipt and the Purchase Request.
Delivery Inspection Deadlines
The General Services Division, Administrative Division, or Administrative Section must prepare, sign, and forward the Request for Inspection to the IAC and the Commission on Audit, together with photocopies of the delivery receipt, sales invoice, service invoice, charge invoice, and approved procurement or contract documents, within twenty-four hours from receipt of deliveries.
The IAC members and Chairman must inspect and verify the items within three working days upon receipt of the Request for Inspection. The Project Proponent must prepare and sign the Technical and Acceptance Report within two working days from actual inspection of deliveries. The Acceptance box of the IAC Report must be prepared, initialed, and signed with the original invoice or delivery documents within twenty-four hours from inspection.
If there is deficiency or non-conformity with the specifications, terms, or conditions, the IAC Report must be returned within one working day to the General Services Division, Administrative Division, or Administrative Section for appropriate action. The Procurement Division, Collection Division, or Collection Section must initial the Inspection box of the IAC Report within twelve working hours from receipt. The IAC Chairman must approve the Inspection box of the IAC Report within twelve working hours from receipt from the Procurement Division.
COA Witnessing and Accountable Forms
The General Services Division, Administrative Division, or Administrative Section must invite the Commission on Audit to witness the inspection of delivered items pursuant to Section 6.06 of COA Circular 95-006. This requirement is important because the inspection process supports public accountability, audit compliance, and the proper recording of accepted goods and services.
For accountable forms delivered by the Bangko Sentral ng Pilipinas, APO Production Unit, Inc., and National Printing Office, inspection is supervised and controlled by the Committee to Supervise the Printing of Specialized Accountable Forms under Revenue Memorandum Order No. 55-2000.
Penalties and Accountability Risks
RMO No. 45-2011 does not create a separate schedule of monetary penalties. However, it expressly provides accountability consequences and process controls. The Requisitioning Officer is held accountable for failure to return or surrender to the General Services Division, Administrative Division, or Administrative Section the waste materials, including destroyed spare parts, components, and other materials considered scrap due to replacement.
The order also requires return of the IAC Report for appropriate action when deficiencies or non-conformity are found. In practical terms, non-compliant deliveries, incomplete deliveries, wrong specifications, missing signatures, absent inspection dates, unsupported technical acceptance, or failure to surrender scrap materials can delay acceptance, payment processing, accounting recording, and audit clearance.
Practical Steps for BIR Offices, Suppliers, and Contractors
BIR requisitioning units should not proceed informally with repair requests. They should first prepare the proper Request for Pre-Repair Inspection, coordinate with the correct office depending on whether the asset is IT equipment, non-IT equipment, vehicle, or building facility, and ensure that warranty status, cause of damage, repair necessity, and estimated repair cost are documented.
Procurement, property, and administrative personnel should apply the 30% current market price test before allowing repair procurement to move forward. Where repair cost exceeds the economic threshold, the transaction should be reviewed carefully because the order treats repair economy as a mandatory control point.
Suppliers and contractors should ensure that the delivered goods and services strictly match the approved PO, JO, APR, RPB, contract, and invoice or delivery documents. They should also expect inspection at the delivery or project site, not at the supplier’s premises, unless an exceptional COA-approved MOA exists.
Project Proponents should prepare the Technical and Acceptance Report within two working days from actual inspection. Administrative offices should forward inspection requests and supporting documents within twenty-four hours from receipt of deliveries. IAC members should observe the three-working-day inspection period, the twenty-four-hour acceptance documentation period, the one-working-day return period for deficient reports, and the twelve-working-hour period for initialing or approving the Inspection box of the IAC Report.
Common Search Issues Under RMO No. 45-2011
Businesses and accountants commonly search for RMO No. 45-2011 using practical phrases such as BIR pre-repair inspection rules, BIR inspection and acceptance committee requirements, BIR delivery inspection procedures, 30% repair cost current market price COA rule, BIR supplier delivery acceptance requirements, and BIR IAC Report deadlines. These search terms reflect the real compliance problem: how to get repairs, deliveries, services, and acceptance documents processed without audit exceptions or payment delays.
How Ablola, Saribong & Gueco Can Help
RMO No. 45-2011 is an internal BIR administrative issuance, but its practical impact reaches suppliers, contractors, service providers, project proponents, and officers responsible for procurement, facilities, accounting, property, and audit compliance. A defective inspection record, unsupported acceptance, uneconomical repair, or deficient delivery documentation can create payment delays, audit exposure, and accountability issues.
Ablola, Saribong & Gueco advises businesses, suppliers, contractors, corporate officers, and regulated entities on BIR compliance, procurement documentation, tax-related government transactions, audit risk, and contract safeguards. For assistance in reviewing BIR-related compliance procedures, procurement documents, supplier contracts, delivery acceptance records, or tax and business law risks, visit MakatiLawFirm.com and consult Ablola, Saribong & Gueco in Makati City.