RMC No. 71-2003 clarifies BIR permit rules for CAS, POS, CRM, e-invoicing, serial numbers, CD-ROM records, and post-system evaluation.

Businesses using computerized accounting systems, POS machines linked to accounting software, web-enabled receipts, or e-invoicing must secure the proper BIR permit before using the system or adopting an enhanced version. RMC No. 71-2003 matters immediately because it clarifies when a taxpayer must apply, where the application must be filed, how long processing should take, what records must be submitted, and what happens if the system used differs from the BIR-approved version.

What RMC No. 71-2003 Changed for CAS, POS, CRM, and E-Invoicing Users

RMC No. 71-2003 clarified issues arising from the revised procedures under RMO No. 29-2002 for applications for permit to adopt a Computerized Accounting System, or CAS, or any component of CAS. It defined CAS as the integration of different component systems that produce computerized books of accounts and computer-generated accounting records and documents.

The circular is important because it treats several business systems as falling within the BIR permit framework. These include a complete CAS, components of CAS, e-invoicing systems, application systems that generate subsidiary ledgers, systems that generate official receipts, sales invoices, cash invoices, cash vouchers, journal vouchers, billing statements, sales tickets, BIR-required reports, and POS or CRM machines connected to a network or linked to CAS.

The most practical rule is that the application for permit must be filed before the system is used or before an enhanced system is adopted. Taxpayers with existing valid CAS permits must apply again if system enhancements or modifications result in a change in system release or an upgrade in version number.

Who Is Affected by RMC No. 71-2003

RMC No. 71-2003 affects taxpayers that use or intend to use a complete CAS, any component of CAS, or an e-invoicing system. It also affects companies using POS machines or cash register machines linked to CAS, businesses with web-enabled electronically generated receipts or invoices, and taxpayers using global or national systems for generating invoices and receipts.

The circular is especially relevant to large corporations, retail chains, restaurants, hotels, service businesses, franchisors and franchisees, sister companies, closely held corporations, and businesses with multiple branches. Affiliated companies, sister companies, franchisees, and closely held corporations must secure separate permits even if they share a server and use the same system previously approved for a mother company or another sister company.

Taxpayers whose CAS is provided by consultants, such as accounting firms or external system providers, are also covered. The taxpayer itself must apply for a separate permit to use the system. The fact that the consultant developed or owns the software does not remove the taxpayer’s obligation to secure the BIR permit.

Where and When to File the CAS Permit Application

For head office and branch use, applications for CAS or components of CAS are generally filed by the head office with the LTAD I, LTAD II, LTDO, or RDO having jurisdiction over the taxpayer’s head office. If a branch adopts CAS ahead of the head office, the branch files with the RDO having jurisdiction over the branch, with a certification that the head office does not use CAS. If the head office later adopts the same CAS and links the branch to it, the head office permit will include a new permit for the branch and will supersede the earlier branch permit.

If a branch uses a different CAS from that of the head office, the branch must apply for a permit with the BIR office having jurisdiction over the branch. For cross-RDO evaluation, the CSET of the office where the application was filed coordinates with the CSET of the other concerned BIR office.

RMC No. 71-2003 also provides processing periods. An application not requiring system demonstration and with no cross-RDO evaluation should be processed in 10 days. An application not requiring system demonstration but requiring cross-RDO evaluation should be processed in 20 days. An application requiring system demonstration but no cross-RDO evaluation should be processed in 30 days. An application requiring both system demonstration and cross-RDO evaluation should be processed in 40 days.

Documents Required for a Permit to Use CAS

The circular confirms that taxpayers must submit BIR Form 1900 and/or BIR Form 1907, a photocopy of the BIR Certificate of Registration, a photocopy of any previously issued permit if applicable, proof of current registration fee payment, a location map, an inventory of previously approved unused invoices and receipts if applicable, and a list of branches that will use CAS.

Businesses must also provide technical and system documents, including the application name and software used, development and database details, functions and features of the application, system flows, process flow, sworn statement and proof of system ownership, backup procedure, disaster and recovery plan, list of reports and correspondences generated by the system with descriptions and sample layouts, and facsimiles of system-generated loose-leaf books of accounts, receipts, and invoices.

Where relevant, the taxpayer must also submit the previously issued permit of the mother company, sister company, or another branch using the same system, and certification from the CSET that previously evaluated the approved system. The CSET may require additional documents during system demonstration or evaluation. If the taxpayer fails to submit the additional requirements within the required period, the application may be denied.

Rules on POS, CRM, Pool Machines, and Stand-Alone Machines

POS and CRM machines linked to CAS are covered by RMO No. 29-2002 procedures as clarified by RMC No. 71-2003. For monitoring purposes, LTAD I and II, LTDOs, and computerized RDOs must create a case in the Case Monitoring System before stickers are issued for CRM or POS machines.

Stand-alone POS or CRM machines not linked to CAS are processed under RR No. 10-99 or later amendatory regulations. Vending machines are likewise processed under RR No. 10-99. Roving of stand-alone CRM or POS machines is not allowed.

Taxpayers may maintain a pool of CRM or POS machines linked to CAS for peak season use. These pool machines must be identified in the application, registered under the head office, and issued permits by the BIR office having jurisdiction over the head office. Only CRM or POS machines belonging to the approved pool may be transported for use in branches or other places of business. The taxpayer must give prior notice to the BIR when pool machines are transferred from the head office to a branch.

Authority to Print, Serial Numbers, and Computer-Generated Receipts

Even if a taxpayer adopts CAS, an Authority to Print remains relevant. In case of system downtime, the taxpayer must use pre-printed receipts and invoices with ATP, which must not exceed 1,000 sets, or use remaining receipts or invoices from previously approved unused manually printed inventory. If the system cannot generate official receipts, invoices, or similar documents, ATP must be applied for following RMO No. 28-2002.

Automatic resetting of serial numbers on POS machines is generally not allowed. For the initial range of serial numbers for computer-generated receipts and invoices, taxpayers must use BIR Form No. 1907. For second and succeeding ranges under a global or national system environment, the taxpayer must submit the application for authority to use the range of serial numbers to the TSS of the BIR office having jurisdiction over the principal place of business. The TSS evaluates the range and prepares a letter of approval.

For global systems using invoices and receipts printed abroad, advance approval of the next set of pre-approved serial numbers is not required. However, the pre-numbered invoices and receipts must be presented to the concerned BIR office for registration before use. For system-generated invoices and receipts under a global system, the serial numbers issued or used during the year must be presented in chronological sequence in the CD-ROM registered with the BIR within 30 days after the end of the accounting period. The taxpayer must also submit a report on the range of serial numbers of receipts and invoices consumed or cancelled within 30 days from the close of the taxable year.

Books of Accounts, CD-ROM Submission, and Post-Reporting Requirements

RMC No. 71-2003 clarifies that hardbound computer-generated books of accounts, receipts, invoices, and accounting records no longer need to be bound and stamped if the taxpayer submits the required affidavit on post-reporting requirements and a soft copy in text file format in CD-ROM. The CD-ROM must be properly labeled with the taxpayer’s name, taxable year, serial number, and volume number of the books of accounts and other accounting records. This must be submitted within 30 days from the close of the taxable year.

If the taxpayer has no capability to submit records in CD-ROM form, manual system procedures apply. The CD must be readable, in text format, virus-free, and properly labeled. If the CD fails the required checks, it will be returned to the taxpayer with the checklist indicating the reason for rejection.

A taxpayer with an approved CAS capable of generating reports such as daily sales and accumulated sales need not maintain a manual Cash Register Machine Sales Book, provided all information required in the manual CRM Sales Book is reflected in computerized reports. However, these reports must be made available during post-system evaluation or authorized tax audit. A taxpayer with a stand-alone POS machine not linked to CAS must still maintain a Cash Register Sales Book unless it applies for and obtains a permit to use a CAS component on sales.

Penalties, Revocation, and Enforcement Risks

RMC No. 71-2003 states that open cases, including stop-filer cases, audit cases, and accounts receivable cases, should not prevent issuance of a CAS permit. Likewise, a penalty payable, pending collection case, or audit case is not a condition precedent to the issuance of the permit.

However, taxpayers face serious compliance risks after approval. If, during post-system evaluation, the CSET discovers that the taxpayer is using a system other than the approved CAS or a modified version of the approved CAS, revocation of the previously approved permit is final and executory. The taxpayer must apply for a new permit.

The CSET may conduct post-system evaluation through a mission order. There is no required six-month interval before the BIR can conduct post-system evaluation; the CSET may conduct it as the need arises. If the taxpayer prohibits the CSET from checking the server during post-system evaluation, the CSET must report the taxpayer to the Legal and Enforcement Service, Attention: Tax Fraud Division.

The circular also warns that any range of serial numbers used other than the approved range is deemed unauthorized and subject to penalties under Title X on statutory offenses and penalties of the National Internal Revenue Code of 1997 and its implementing regulations.

Practical Steps for Businesses Using CAS, POS, or E-Invoicing

Businesses should first determine whether their accounting, invoicing, POS, CRM, sales reporting, inventory, payroll, subsidiary ledger, or web-enabled receipt system is a complete CAS, a component of CAS, or a stand-alone machine governed by RR No. 10-99. Search terms such as BIR CAS permit requirements Philippines, RMC 71-2003 POS machine linked to CAS, computerized accounting system BIR permit, e-invoicing permit BIR, and BIR serial number approval invoices are directly relevant to this compliance review.

Second, businesses should review whether any system enhancement changed the system release or upgraded the version number. If so, a new permit application may be required before the enhanced system is adopted. Third, companies with affiliates, branches, franchisees, or shared servers should not assume that one approved system permit covers all entities. RMC No. 71-2003 requires separate permits in several related-party and branch scenarios.

Fourth, taxpayers should prepare both legal and technical documents early: BIR registration documents, proof of registration fee payment, branch list, software details, system and process flows, backup and disaster recovery plan, reports generated by the system, and samples of computerized receipts, invoices, and books. Fifth, taxpayers using global or national systems should track serial numbers and calendar the 30-day deadline after the accounting period for CD-ROM registration and the 30-day deadline after the close of the taxable year for reporting consumed or cancelled serial numbers.

ASG Law Can Help with BIR CAS Permit and Tax Compliance

RMC No. 71-2003 remains a key reference for taxpayers adopting computerized accounting systems, POS machines linked to CAS, web-enabled receipts, e-invoicing, and system-generated books of accounts. The compliance burden is both legal and technical: a business must know which BIR office has jurisdiction, which forms and attachments are required, when system demonstrations apply, how serial numbers must be approved or reported, and how to prepare for post-system evaluation.

Ablola, Saribong & Gueco assists corporations, SMEs, accounting teams, tax managers, and technology-enabled businesses in evaluating CAS permit exposure, preparing BIR submissions, coordinating tax compliance documentation, reviewing invoicing and receipt workflows, and responding to BIR compliance issues. For assistance with RMC No. 71-2003, BIR CAS permit applications, POS or CRM compliance, e-invoicing implementation, and tax documentation reviews, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *