RMO No. 26-2003 sets BIR procedures for on-call repair of defective IT equipment not under warranty or maintenance contracts.
BIR offices and personnel handling defective computers, workstations, peripherals, and video conferencing equipment must follow a documented pre-repair, procurement, inspection, and funding process before any on-call repair or maintenance work is undertaken. RMO No. 26-2003 matters because it limits on-call repair to IT equipment not covered by existing BIR comprehensive maintenance service contracts and not under warranty, and it assigns specific responsibilities to requesting offices, IT support units, procurement offices, accounting offices, regional administrative divisions, inspection committees, and finance units.
What RMO No. 26-2003 Changed
RMO No. 26-2003 prescribes the policies and procedures for the on-call repair and maintenance of defective IT equipment in the BIR National Office, Regional Offices, District Offices, and certain remote BIR offices. The order covers Personal Computers, workstations, peripherals, and video conferencing equipment.
The most important rule is that on-call repair and maintenance applies only to defective IT equipment that is not listed in any BIR comprehensive maintenance service contract and is not under warranty. This creates a threshold check before any repair request may proceed: the requesting office must first verify whether the equipment is still covered by a maintenance contract or warranty. If it is covered, the on-call repair procedure is not the proper route.
The issuance also divides repair responsibility by office location. For the National Office, the Systems Support Division under the Information Systems Operations Service handles repair assessment and in-house repair. For Regional and District Offices within Metro Manila and Metro Cebu, the Revenue Data Centers handle the technical evaluation and repair. For remote BIR offices, the Regional Director may enter into a straight contract for labor and materials with local IT service providers or contractors.
Who Is Affected by RMO No. 26-2003
RMO No. 26-2003 is directed to all internal revenue officials and employees, but the offices most affected are those that request, process, approve, inspect, procure, fund, and pay for IT repair work. These include BIR requesting offices, SSD-ISOS, Revenue Data Centers, the Procurement Division, General Services Division, Accounting Division, Administrative Division of Revenue Regions, Finance Division of Revenue Regions, Inspection and Acceptance Committees, the Office of the Assistant Commissioner of Information Planning and Quality Service, and the Budget Division.
For businesses, suppliers, IT contractors, and procurement compliance teams dealing with government agencies, the issuance is useful because it shows how the BIR internally documents repair needs, canvasses service providers, handles parts replacement, routes procurement documents, and processes payment for IT repair services. Search terms likely used by accountants, procurement officers, and contractors include BIR IT equipment repair procedure, on-call repair maintenance BIR, RMO 26-2003 IT equipment, BIR repair and maintenance procurement, and BIR Inspection and Acceptance Report IT parts.
Key Compliance Requirements for National Office Repairs
For repairs at the National Office, the requesting office must first identify the defective IT equipment and log the repair request with SSD-ISOS Help Desk. SSD-ISOS must validate whether the defective equipment is covered by a maintenance service contract or warranty. If it is not covered, SSD-ISOS evaluates the equipment and prepares the corresponding Trouble Ticket.
The requesting office must then prepare a Request for Pre-Repair Inspection Form in two copies and route it to SSD-ISOS and the Procurement Division. If SSD-ISOS determines that the repair cannot be handled in-house, the requesting office coordinates with the Procurement Division for procurement of services, including labor and materials from a contractor or service provider.
Before repair proceeds, the Request for Pre-Repair Inspection Form must be forwarded to the Inspection and Acceptance Committee for pre-repair inspection. The requesting office must also prepare a Supplies Availability Inquiry to check whether the required IT parts are available in General Services Division stocks. If the parts are available, the requesting office prepares a Requisition and Issue Slip. If the parts are not available, the requesting office must secure certification from the Office of the Assistant Commissioner of Information Planning and Quality Service that the repair cost will be charged against the allocated budget for on-call repairs and maintenance, then forward the Purchase Request, Supplies Availability Inquiry, and certification to the Procurement Division.
Key Compliance Requirements for Metro Manila and Metro Cebu Offices
For Regional and District Offices within Metro Manila and Metro Cebu, including RDC Cebu and LTDO Cebu, the requesting office must log the repair request with the Revenue Data Center Help Desk. The Revenue Data Center verifies whether the equipment is under a BIR maintenance service contract or warranty, evaluates the defective equipment if it is not covered, and issues the Trouble Ticket.
The requesting office prepares the Request for Pre-Repair Inspection Form and forwards it to the Revenue Data Center and the Administrative Division of the Revenue Region. For repairs that cannot be handled in-house, the requesting office coordinates with Admin-RR for procurement of services. The Request for Pre-Repair Inspection Form is then forwarded to the Inspection and Acceptance Committee for pre-repair inspection.
The requesting office must prepare the Supplies Availability Inquiry to determine whether replacement IT parts are available in Admin-RR stocks. If parts are available, the requesting office prepares the Requisition and Issue Slip. If parts are not available, the requesting office prepares the Purchase Request with the Supplies Availability Inquiry and forwards the documents to Admin-RR for purchase of the needed IT parts. Admin-RR must prepare the canvass and Summary Report of Defective IT Equipment for On-Call Repair/Maintenance, and must purchase the requested IT parts following existing procurement procedures.
Special Procedure for Remote BIR Offices
RMO No. 26-2003 creates a separate procedure for remote BIR offices. These offices, through their Regional Director, may enter into a straight contract for labor and materials with local IT service providers or contractors for on-call repair and maintenance of IT equipment.
The remote offices identified in the order include RR 1 Calasiao, Pangasinan covering RDO Nos. 1 to 6; RR 2 CAR covering RDO Nos. 7 to 12; RR 3 Tuguegarao, Cagayan covering RDO Nos. 13 to 16; RR 4 San Fernando, Pampanga covering RDO Nos. 17 to 23; RR 9 San Pablo City covering RDO Nos. 54 to 63; RR 10 Legaspi City covering RDO Nos. 64 to 70; RR 11 Iloilo City covering RDO Nos. 71 to 75; RR 12 Bacolod City covering RDO Nos. 76 to 79; RR 14 Tacloban City covering RDO Nos. 85 to 90; RR 15 Zamboanga City covering RDO Nos. 91 to 96; RR 16 Cagayan de Oro City covering RDO Nos. 97 to 102; RR 17 Butuan City covering RDO Nos. 103 to 106; RR 18 Cotabato City covering RDO Nos. 107 to 111; RR 19 Davao City covering RDO Nos. 112 to 115; RDO 35 Romblon; RDO 36 Puerto Princesa, Palawan; RDO 37 San Jose, Occidental Mindoro; and RDO 84 Tagbilaran, Bohol.
For remote offices, the requesting office must verify through Admin-RR whether the equipment is under maintenance contract or warranty. If not covered, the requesting office must ask a local service provider or contractor to assess the required repair, prepare the Request for Pre-Repair Inspection Form, attach the repair assessment or canvass, and request the Regional Inspection and Acceptance Committee to conduct pre-repair inspection. The requesting office must then prepare the Purchase Request for on-call repair and maintenance and forward it with the Request for Pre-Repair Inspection Form to Admin-RR.
When the equipment must be pulled out by the local service provider, the requesting office must prepare a Gate Pass. Once repaired, the requesting office receives the equipment through a Delivery Receipt with the corresponding guaranty or warranty certificate and requests post-repair inspection by the Regional Inspection and Acceptance Committee.
Forms and Documentation Required
RMO No. 26-2003 requires the use of several New Government Accounting System forms for National Government Agencies. These include the Supplies Availability Inquiry, Purchase Request, Requisition and Issue Slip, Inspection and Acceptance Report, and Waste Materials Report. The order also uses the Request for Pre-Repair Inspection Form and the Summary Report of Defective IT Equipment for On-Call Repair/Maintenance.
For National Office repairs and repairs within Metro Manila and Metro Cebu, the Request for Pre-Repair Inspection Form must have the corresponding Trouble Ticket issued by SSD-ISOS or the Revenue Data Center. For remote requesting offices, the lowest quotation of the local contractor must be attached to the Request for Pre-Repair Inspection Form. If there is doubt regarding the assessment made by the local service provider, the requesting office may refer the matter to the Revenue Data Center concerned for reassessment.
The order also clarifies that purchased IT parts needed for repair of defective IT equipment will no longer be issued a new Acknowledgement Receipt for Equipment, formerly known as the Memorandum Receipt for Equipment, Semi-Expandable and Non-Expandable Property.
Funding and Payment Rules
The allocated budget for on-call repair and maintenance of IT equipment must be used for this purpose. Fund allocation or transfer requests must be coordinated with the Office of the Assistant Commissioner of Information Planning and Quality Service.
For National Office repairs, the Office of the Assistant Commissioner of Information Planning and Quality Service issues the certification that the budget for the defective IT equipment subject to repair will be charged against the allocated budget for on-call repairs and maintenance. For regional funding requests, the Finance Division of the Revenue Region prepares the memorandum addressed to the Assistant Commissioner for Information Planning and Quality Service requesting fund transfer, with the Summary Report of Defective IT Equipment attached. The request may be forwarded through e-mail, facsimile transmittal, or registered mail.
The Accounting Division processes payment for purchased IT parts needed for National Office repairs. For remote repairs, Admin-RR receives the contractor billing, prepares the disbursement voucher, and forwards it to the Finance Division of the Revenue Region for processing of payment under existing accounting procedures.
Penalties and Risks for Non-Compliance
RMO No. 26-2003 does not prescribe a specific fine, surcharge, or monetary penalty for failure to follow the repair procedure. However, non-compliance creates administrative, audit, procurement, and payment risks. A repair request may be delayed or questioned if it lacks the required pre-repair inspection, Trouble Ticket, lowest quotation, Supplies Availability Inquiry, Purchase Request, Requisition and Issue Slip, Inspection and Acceptance Report, Waste Materials Report, or funding certification.
The practical risk is that an office may procure repair services or replacement parts without the required documentation showing that the equipment was not under warranty, not under a maintenance contract, properly inspected before repair, properly received after repair, and properly charged to the allocated on-call repair and maintenance budget.
Practical Steps for BIR Offices, Contractors, and Compliance Teams
Offices handling defective IT equipment should first confirm whether the equipment is covered by an existing maintenance service contract or warranty. If it is covered, the on-call repair process under RMO No. 26-2003 should not be used. If it is not covered, the office should immediately secure the proper technical evaluation and Trouble Ticket from SSD-ISOS or the Revenue Data Center, unless the office is a remote BIR office using the local contractor procedure.
Requesting offices should prepare the Request for Pre-Repair Inspection Form early and ensure that it is supported by either the Trouble Ticket or, for remote offices, the local contractor’s lowest quotation. They should also route the form to the Inspection and Acceptance Committee for pre-repair inspection before parts are purchased or repair work is performed.
Procurement and finance personnel should check whether the required parts are in stock before initiating a Purchase Request. If parts are not available, the proper procurement, funding, inspection, acceptance, and payment documents must be completed. For remote offices, the Gate Pass, Delivery Receipt, guaranty or warranty certificate, and post-repair inspection are especially important because the equipment may be pulled out by an outside service provider.
How Ablola, Saribong & Gueco Can Help
RMO No. 26-2003 is an internal BIR administrative issuance, but it reflects the kind of documentation discipline that businesses, contractors, suppliers, and regulated entities must understand when dealing with government procurement, government payments, IT maintenance contracts, repair documentation, and audit compliance. For companies supplying IT equipment, providing repair services, or responding to government procurement requirements, the details matter: warranty coverage, scope of repair, inspection forms, acceptance reports, purchase requests, and payment documents can determine whether a transaction is approved, delayed, or questioned.
Ablola, Saribong & Gueco advises businesses, suppliers, contractors, and regulated entities on BIR compliance, procurement documentation, tax risk management, contract review, and administrative law issues. For assistance with BIR issuances, government-facing contracts, procurement compliance, or tax and business law concerns, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.