RMC No. 31-2010 requires the new eDST stamp for taxable documents and allows constructive stamping with BIR Form 2000 until June 30, 2010.
Taxpayers required to use the Electronic Documentary Stamp Tax System must use the new rectangular black Documentary Stamp Tax mark on taxable documents beginning January 2010, while taxpayers that cannot yet comply with eDST requirements may continue using the constructive stamping or receipt system until June 30, 2010. For banks, insurance companies, financing companies, large corporate taxpayers, and other entities handling DST-taxable documents, the immediate compliance point is documentary proof: the taxable document must show either the new eDST stamp or, where allowed, the attached BIR Form 2000 and Authorized Agent Bank confirmation receipt or deposit slip.
What RMC No. 31-2010 Changed
RMC No. 31-2010 prescribes the use of a new Documentary Stamp Tax stamp for taxpayers mandated to use the Electronic Documentary Stamp Tax System. The eDST System was implemented under Revenue Regulations No. 7-2009 and replaced the Documentary Stamp Electronic Imprinting Machine, commonly referred to as DSEIM.
The key change is the physical and informational format of the stamp to be affixed on taxable documents. Effective January 2010, covered taxpayers using the eDST System must affix a rectangular black stamp on taxable documents. This is not merely a cosmetic change. The new stamp is intended to carry transaction-identifying and tax-identifying details that allow the BIR, the taxpayer, and counterparties to verify that Documentary Stamp Tax has been paid on the taxable document.
For Philippine accountants, CFOs, and corporate tax teams searching for guidance on RMC No. 31-2010, eDST stamp requirements, Documentary Stamp Tax taxable documents, BIR Form 2000 constructive stamping, or eDST System compliance, the practical point is straightforward: the taxpayer must make sure that the DST payment is evidenced in the manner specifically allowed by the BIR for the period and system applicable to the taxpayer.
Who Is Affected by RMC No. 31-2010
RMC No. 31-2010 applies to taxpayers mandated to use the Electronic Documentary Stamp Tax System. These are taxpayers whose transactions involve documents subject to Documentary Stamp Tax and who fall within the BIR’s eDST implementation rules under Revenue Regulations No. 7-2009.
The circular is particularly important for businesses and institutions that regularly issue, execute, accept, or process DST-taxable documents. These may include corporate taxpayers dealing with loan agreements, debt instruments, insurance policies, shares of stock, certificates, leases, deeds, and other documents subject to DST under the National Internal Revenue Code and related BIR issuances. The exact taxability and rate still depend on the nature of the document and the applicable DST provisions, but RMC No. 31-2010 focuses on how the stamp evidencing payment must appear for taxpayers under the eDST System.
Corporate accountants and tax managers should also treat this as a records-management issue. A document may be substantively taxable for DST purposes, but the company still needs documentary proof that the proper DST was paid and attached or reflected in the required manner. Counterparties, auditors, and BIR examiners may look for the eDST stamp or the alternative constructive stamping documents allowed during the transition period.
Required Features of the New eDST Stamp
The new eDST stamp prescribed by RMC No. 31-2010 must be a rectangular black stamp. It must bear the words “DOCUMENTARY STAMP” in capital letters, the logo of the Bureau of Internal Revenue, and the amount of DST paid printed just below the words “DOCUMENTARY STAMP.”
The stamp must also contain a secured layer below the amount of DST paid, a black bar, and the number, date, and time of the transaction. In addition, it must show the Alpha Numeric Tax Code or ATC, the Philippine Standard Industry Code or PSIC, and the BIR Revenue District Office.
These details matter because they connect the taxable document to a specific DST transaction. The amount paid, transaction number, transaction date and time, ATC, PSIC, and RDO information can help support the taxpayer’s position that DST was properly paid. For companies with large volumes of taxable documents, the absence of these details may create avoidable issues during internal audit, external audit, due diligence, or BIR examination.
Transition Rule: Constructive Stamping or Receipt System Until June 30, 2010
RMC No. 31-2010 recognizes that some taxpayers or users may not yet be able to comply with the requirements of the eDST System. For those taxpayers, the Constructive Stamping/Receipt System, or CS/RS, remains allowed pursuant to RMC No. 24-2010 dated March 1, 2010.
The important deadline is June 30, 2010. RMC No. 31-2010 states that RMC No. 24-2010 deferred the full implementation of the eDST System until June 30, 2010. During this transition period, taxpayers who still cannot comply with eDST requirements may use the constructive stamping or receipt system.
Under the constructive stamping or receipt system, the affixture of the DST is made by attaching the Documentary Stamp Tax Declaration Return, BIR Form 2000, and the duly issued Confirmation Receipt or Deposit Slip by the Authorized Agent Bank to the taxable document. In practical terms, the taxable document should not stand alone. It should be supported by BIR Form 2000 and the AAB confirmation receipt or deposit slip evidencing payment.
Key Compliance Requirements and Deadlines
The first compliance date is January 2010, when the new rectangular black eDST stamp became the stamp to be affixed on taxable documents by eDST users. Covered taxpayers should therefore review taxable documents issued or processed from January 2010 onward and check whether the required eDST stamp format was used.
The second compliance date is June 30, 2010. Until that date, taxpayers or users who still could not comply with the eDST System requirements were allowed to use the Constructive Stamping/Receipt System. After the transition period, taxpayers mandated to use eDST should be prepared to comply fully with the eDST System, subject to any later BIR issuances that may have modified implementation.
The practical documentary requirement during the transition period is specific: attach BIR Form 2000 and the duly issued Authorized Agent Bank Confirmation Receipt or Deposit Slip to the taxable document. This is the substitute evidence of affixture under the constructive stamping or receipt system.
Penalties and Risks for Non-Compliance
RMC No. 31-2010 does not state a specific penalty table or new penalty rate for failure to use the new eDST stamp. However, non-compliance can still create significant tax and documentation risks because Documentary Stamp Tax is a statutory tax on covered documents, instruments, loan agreements, papers, and transactions.
The main risk is that a taxable document may be questioned for lack of proper proof that DST was paid in the required manner. During a BIR examination, due diligence review, financing transaction, insurance review, or corporate records audit, the absence of the prescribed eDST stamp or the allowed constructive stamping documents may require the taxpayer to explain, reconstruct, or prove payment. That can delay transactions and expose the taxpayer to assessment risk if DST payment cannot be substantiated.
Businesses should not treat the stamp format as a mere administrative detail. The stamp carries the amount of DST paid, transaction number, date and time, ATC, PSIC, and RDO information. These are compliance data points that may be used to match the document with the taxpayer’s DST payment records.
Practical Steps for Businesses, CFOs, and Tax Teams
First, identify whether the company is a taxpayer mandated to use the eDST System under Revenue Regulations No. 7-2009 and related BIR issuances. If yes, the company’s tax and accounting teams should confirm that taxable documents beginning January 2010 carry the new rectangular black eDST stamp with the required information.
Second, review the company’s inventory of DST-taxable documents. These may include contracts, financing documents, insurance-related documents, corporate documents, and other instruments for which DST is commonly assessed. The review should focus not only on whether DST was computed and paid, but also on whether the required proof of payment was affixed or attached to the document.
Third, for documents processed during the transition period where the taxpayer could not yet comply with eDST requirements, verify that the constructive stamping or receipt system was properly used. This means BIR Form 2000 and the Authorized Agent Bank Confirmation Receipt or Deposit Slip should be attached to the taxable document.
Fourth, update internal checklists. A DST compliance checklist should require the tax team to confirm the amount of DST paid, the presence of the required stamp or attachment, the transaction number, transaction date and time, ATC, PSIC, and RDO details. For companies with recurring DST exposure, this should be integrated into contract release, loan documentation, insurance processing, treasury, and corporate secretarial workflows.
Fifth, retain proof in a manner that can be retrieved during audit. The BIR, auditors, counterparties, lenders, or investors may later ask for proof that DST was paid. Maintaining a clear file containing the taxable document, eDST stamp details, BIR Form 2000 where applicable, and AAB confirmation receipt or deposit slip reduces the risk of disputes and delays.
Why RMC No. 31-2010 Still Matters for Document Review
Although RMC No. 31-2010 is an implementation circular from 2010, it remains useful in reviewing older contracts, loan files, insurance documents, and corporate records. Businesses often encounter legacy documents during audits, acquisitions, financing, tax investigations, corporate housekeeping, and litigation. When those documents fall within the January 2010 to June 30, 2010 implementation window, the circular helps identify what proof of DST payment should exist.
For taxpayers reviewing historical files, the search terms that matter are RMC No. 31-2010, eDST stamp requirements Philippines, Documentary Stamp Tax BIR Form 2000, constructive stamping receipt system, and Revenue Regulations No. 7-2009 eDST. These terms point to the central issue: whether the taxable document bears the correct eDST stamp or the transitional proof allowed by the BIR.
How Ablola, Saribong & Gueco Can Help
Ablola, Saribong & Gueco advises businesses, CFOs, accounting departments, and corporate legal teams on Documentary Stamp Tax compliance, BIR audits, tax documentation, contract review, and corporate housekeeping. For companies dealing with legacy documents, high-volume taxable instruments, or BIR compliance reviews, the firm can help determine whether DST was properly paid and whether the available documents are sufficient to support the taxpayer’s position.
For assistance with eDST compliance, Documentary Stamp Tax review, BIR audit preparation, or tax documentation issues involving RMC No. 31-2010 and related issuances, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.