RMO No. 18-2015 sets the BIR workaround for POS, CRM and SPM registration when taxpayers have more than 999 branches and 5-digit branch codes.

Taxpayers with 1,000 or more registered branches must use a special workaround when registering Cash Register Machines, Point of Sales machines, and Special Purpose Machines under the eAccReg and eSales systems. For businesses with branch codes beyond 999, the key compliance action is to register affected machines under the Head Office TIN as roving machines, encode the 5-digit branch code as part of the machine serial number, notify the proper BIR office, and continue sales reporting through the Head Office branch code until the enhanced systems become available.

What RMO No. 18-2015 Changes

RMO No. 18-2015 addresses a practical registration problem for large taxpayers and multi-branch businesses whose branch offices exceed the 3-digit branch code limit of the BIR’s older systems. The Bureau’s Integrated Tax System could cater only up to 999 branch codes for a corresponding Taxpayer Identification Number. The eTIS-1 Taxpayer Registration System, however, can handle 5-digit TIN branch codes. The problem is that related BIR electronic services, specifically eAccReg and eSales, still accept only a 3-digit TIN branch code upon enrollment.

The result is a mismatch: a branch with a 5-digit branch code may be recognized under eTIS-1 TRS, but its POS, CRM, or SPM registration may not be accepted through eAccReg and its sales reporting may not be properly handled through eSales. RMO No. 18-2015 supplies the workaround for this gap.

The central rule is that applications for Permit to Use of CRMs, POS machines, and SPMs for branches with more than 999 branch codes must be registered as roving machines under the Head Office TIN with branch code 000. The 5-digit branch code is not ignored. Instead, it must be embedded as a prefix in the machine serial number following the prescribed format.

Who Is Affected by RMO No. 18-2015

This issuance primarily affects large taxpayers and businesses with extensive branch networks, especially those whose branch registration has reached the 1,000th branch and above. The relevant taxpayers are those whose TIN applications for branch registration have reached more than 999 branch codes and whose machines must be registered through eAccReg and reported through eSales.

The affected BIR offices include Revenue District Offices, the Large Taxpayer Assistance Division, the Excise Large Taxpayer Regulatory Division, LTD-Makati, and LTD-Cebu. These offices must process branch registrations using eTIS-1 TRS upon roll-out to their respective offices, and must monitor machines registered under the workaround.

For business owners, CFOs, tax managers, and corporate accountants, the practical search terms are: RMO 18-2015 eAccReg workaround, BIR branch code more than 999, POS machine registration 5-digit branch code, eSales reporting Head Office branch 000, and Permit to Use roving machines BIR.

Key Compliance Requirements for Taxpayers and Machine Suppliers

The first compliance requirement is to register all applications for Permit to Use of CRMs, POS machines, and SPMs for TINs with more than 999 branch codes as roving machines. This must be done with the RDO or Large Taxpayer Service office having jurisdiction over the Head Office TIN via the eAccReg system.

In the eAccReg registration process, the taxpayer or supplier must enter the Head Office TIN in the TIN field and use branch code 000 in the branch field. The machine type must be selected under Machine Details, and the ROVING checkbox must be selected.

The most important encoding requirement is in the Terminal or POS Details. The 5-digit TIN branch code must be affixed in the Serial Number field as a prefix to the sales machine serial number. The prescribed format is BR plus the 5-digit TIN branch code, followed by a hyphen, followed by the machine serial number. The RMO gives the example BR01000-xxxxxx.

For example, if a taxpayer’s Head Office TIN is 999-999-999-000 and it has branches with TIN branch codes 01000 and 01001, machines of those branches are registered under the Head Office TIN and branch code 000. A POS machine with serial number 4DY48372 assigned to branch 01000 must be encoded as BR01000-4DY48372. A CRM with serial number SG12345 assigned to the same branch must be encoded as BR01000-SG12345. For branch 01001, a POS with serial number AB67890 must be encoded as BR01001-AB67890, and a CRM with serial number 3ST65781 must be encoded as BR01001-3ST65781.

After encoding the machine information, the taxpayer must add the machine details to the temporary table, review the entries, proceed to the next screen, review the application details, and submit the application.

Notification and eSales Reporting Requirements

The Head Office must notify the Chief of Office of the concerned RDO, LTAD, ELTRD, LTD-Makati, or LTD-Cebu by email or letter. The notice must contain the list of branches with more than 999 TIN branch codes whose machines are subject to registration. The notice must also include the machine type and serial number of the machines related to the branches that will use them.

Sales reports for all registered CRMs, POS machines, and SPMs of branches with more than 999 branch codes must still be submitted through the eSales System. In doing so, the taxpayer must select the Head Office code 000 in the Branch field, enter the date covering the sales, and select the applicable Machine Identification Number for reporting.

This is important for accounting and tax compliance teams because the 5-digit branch identity is not entered in the branch field during the workaround period. It is captured through the serial number prefix. Internal reports, accounting records, POS deployment records, and BIR submissions should therefore be reconciled carefully so that the branch actually using the machine can be identified from the BR plus 5-digit branch code prefix.

What BIR Offices Must Do

The concerned RDO, LTAD, ELTRD, LTD-Makati, or LTD-Cebu must monitor the machines of the taxpayer’s 1,000th branch and above using a logbook for reference. The office must also receive the taxpayer’s email or letter notification listing the branch offices with more than 999 TIN branch codes and the machines subject to registration under the Head Office.

For monitoring purposes, reports generated in xls format from the eAccReg and eSales systems may be filtered through the Serial Number column. Because the workaround requires the branch code prefix to appear in the serial number, entries with the prefix for branches beyond 999 can be extracted and filtered more easily.

Transitory Rule: What Happens When eAccReg and eSales Are Enhanced

The workaround is temporary. RMO No. 18-2015 provides that the procedures must be observed until the relevant systems and ITS are enhanced.

Once the enhanced eAccReg system becomes capable of processing taxpayers with more than 999 branch codes, all permits issued under this workaround must be cancelled, with retention of the sales data. The affected machines must then be registered with the concerned LTAD, ELTRD, LTD-Makati, LTD-Cebu, or RDO having jurisdiction over the particular branch office using the machine’s original serial number.

At that stage, taxpayers must enroll in eAccReg and eSales using the 5-digit TIN branch code. The RMO also requires the BIR office to notify the concerned taxpayers of the cancellation of the Permit to Use issued under the workaround and to require them to enroll and register their machines using the original machine serial number.

Effective Date and Deadlines

RMO No. 18-2015 is dated September 2, 2015 and takes effect immediately. It does not provide a fixed calendar deadline for the transition to the enhanced eAccReg and eSales systems. Instead, the transition is tied to system capability: once the enhanced systems can handle 5-digit TIN branch codes, permits issued under the workaround must be cancelled and the machines must be registered under the appropriate branch office using the original machine serial numbers.

Penalties for Non-Compliance

RMO No. 18-2015 does not prescribe a separate new penalty, surcharge, interest rate, or fine for non-compliance. However, the compliance risk is operational and tax-related. A taxpayer that fails to follow the workaround may encounter issues in securing or maintaining the Permit to Use for CRMs, POS machines, or SPMs for branches beyond the 999-branch limit. It may also create reporting problems under eSales if sales are not properly connected to the machine registration and Head Office branch code procedure.

For large taxpayers and multi-branch businesses, failure to maintain a clean mapping between the Head Office registration, the BR-prefixed serial number, the actual 5-digit branch code, and the reported sales may expose the company to questions during tax audit, machine inventory review, or BIR reconciliation.

Practical Steps for CFOs, Accountants, and Tax Managers

Businesses with 1,000 or more branches should first identify all branches with 5-digit TIN branch codes and list all CRMs, POS machines, and SPMs assigned to those branches. The list should include the actual branch code, machine type, original machine serial number, Machine Identification Number when available, and the Head Office TIN.

Second, tax and accounting teams should ensure that every affected machine registered through eAccReg uses the Head Office TIN and branch code 000, with the machine marked as roving. The Serial Number field should follow the BR plus 5-digit branch code plus hyphen plus machine serial number format. The taxpayer’s internal records should mirror this exact format to avoid reconciliation gaps.

Third, the Head Office should send the required letter or email notification to the concerned BIR office, attaching the list of affected branches and machines. This notification should be retained as part of the taxpayer’s BIR compliance file.

Fourth, eSales reporting should be performed using Head Office branch code 000 while ensuring that the correct Machine Identification Number and reporting dates are selected. The accounting team should maintain a separate working file mapping each MIN and BR-prefixed serial number to the correct branch.

Finally, taxpayers should prepare for the post-enhancement transition. When eAccReg and eSales become capable of accepting 5-digit TIN branch codes, permits issued under the workaround will be cancelled and the machines must be registered again under the proper branch office using the original serial number.

How Ablola, Saribong & Gueco Can Help

RMO No. 18-2015 is highly technical, but it matters to large businesses because POS and CRM registration errors can disrupt sales reporting, tax audit readiness, and branch-level compliance. Ablola, Saribong & Gueco assists corporations, large taxpayers, retailers, service businesses, and multi-branch enterprises in reviewing BIR registration workflows, preparing tax compliance notices, coordinating with RDOs and Large Taxpayer offices, and aligning accounting records with BIR electronic reporting requirements.

For assistance with eAccReg, eSales, Permit to Use issues, branch registration, and BIR compliance for large or multi-branch businesses, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *