RMC No. 04-2018 sets transition rules for eFPS excise tax filings affected by TRAIN Law rates, including manual filing for new forms.

EFPS filers dealing with excisable articles covered by the TRAIN Law had to follow temporary filing and payment procedures because the revised excise tax rates and new excise tax forms were not yet fully reflected in the BIR’s electronic filing platform. RMC No. 04-2018 matters to manufacturers, importers, taxpayers making removals of excisable goods, withholding agents for invasive cosmetic procedures, and businesses handling sweetened beverages because the responsibility to compute, declare, and pay the correct excise tax remained with the taxpayer even during the system transition.

What RMC No. 04-2018 Changed

RMC No. 04-2018 provided transition procedures for all Electronic Filing and Payment System, or eFPS, filers whose tax returns were affected by the revised excise tax rates under Republic Act No. 10963, otherwise known as the Tax Reform for Acceleration and Inclusion Law or TRAIN Law. The circular covered excise tax changes under Sections 42, 43, 45, 46, 47, and 48 of the TRAIN Law, specifically for cigars and cigarettes, petroleum products, automobiles, non-essential services involving invasive cosmetic procedures, sweetened beverages, and mineral products.

The most important compliance point is that taxpayers could not use the absence of updated eFPS forms as a reason to delay or underpay excise taxes. Pending enhancement of the eFPS, taxpayers were required to use existing online forms for certain products, follow special encoding procedures, or file and pay manually for newly introduced forms. For CFOs, accountants, and excise taxpayers searching for BIR eFPS excise tax transition procedures, TRAIN Law excise tax filing, BIR Form 2200-S sweetened beverages, BIR Form 1620-XC cosmetic procedures, and RMC 04-2018 excise tax compliance, the practical message is straightforward: compute correctly, file using the prescribed temporary procedure, and pay through the applicable channel.

Forms Enhanced and Forms Introduced

RMC No. 04-2018 identified four existing excise tax returns being enhanced to reflect the revised TRAIN Law excise tax rates. These were BIR Form No. 2200-T for tobacco products, BIR Form No. 2200-P for petroleum products, BIR Form No. 2200-AN for automobiles and non-essential products, and BIR Form No. 2200-M for mineral products.

The circular also identified two newly introduced BIR forms. These were BIR Form No. 2200-S, the Excise Tax Return for Sweetened Beverages, and BIR Form No. 1620-XC, the Final Withholding of Excise Tax on Cosmetic Procedures. These new forms are especially relevant to businesses in the beverage sector and to persons required to withhold final excise tax on non-essential services involving invasive cosmetic procedures.

Who Is Affected

The circular applies to all eFPS filers whose returns are affected by the revised excise tax rates and new excise tax obligations under the TRAIN Law. The most directly affected taxpayers are businesses dealing in cigars and cigarettes, petroleum products, automobiles, mineral products, sweetened beverages, and non-essential services involving invasive cosmetic procedures.

For corporate taxpayers, the affected internal teams usually include finance departments, tax compliance officers, plant or warehouse personnel responsible for removals of excisable articles, and accounting teams that prepare eFPS filings. For businesses subject to excise tax on actual removals, the circular is particularly important because every removal of excisable articles must be supported by a correct declaration and corresponding payment. For withholding agents dealing with cosmetic procedures, the introduction of BIR Form No. 1620-XC created a separate compliance workflow requiring manual filing and payment while the electronic system was still being enhanced.

Temporary eFPS Procedure for Existing Excise Tax Forms

For BIR Form No. 2200-T, BIR Form No. 2200-P, BIR Form No. 2200-AN, and BIR Form No. 2200-M, eFPS filers were instructed to e-file using the existing online forms so they could proceed to e-payment. The circular divided the procedure between returns involving purely prepayment, advance deposit, or similar schemes, and returns involving payment on actual removals.

For returns with purely prepayment, advance deposit, or similar schemes, the taxpayer had to go to Part II, Manner of Payment, and tick the second box in Item No. 15, identified as Prepayment or Advance Deposit. This applied to BIR Form No. 2200-T, 2200-P, 2200-AN, and 2200-M. The taxpayer then had to proceed to Item No. 23A, Tax Payment or Deposit, in Part III, Payments and Application, and key in the amount to be paid or deposited. After encoding the amount, the taxpayer had to click the Validate button to check the system computation. If all figures were correct, the taxpayer had to click Submit, then Proceed to Payment to effect the payment or deposit transaction.

For returns involving payment on actual removals, the taxpayer had to go to Part II, Manner of Payment, and tick the first box in Item No. 15, identified as Payment on Actual Removal. Schedule 1, the Summary of Removals and Excise Tax Due on Cigars and Cigarettes, Petroleum Products, Automobiles, Mineral Products, and Mineral Products Chargeable against Payments, would appear on the screen.

Because the revised tax rates were not yet in place in the electronic system, RMC No. 04-2018 required taxpayers to use the Others field in Schedule 1 for details of removals. The circular required the use of specific temporary ATC codes: XA for alcohol products, XT for tobacco products, XP for petroleum products, XGAN for automobiles, and XM for mineral products. The Total Tax Due would then be automatically populated to the excise tax due item, after which the taxpayer had to click Proceed to Payment to complete the e-payment transaction.

Manual Filing for Sweetened Beverages and Cosmetic Procedures

For the newly introduced BIR Form No. 2200-S for sweetened beverages and BIR Form No. 1620-XC for final withholding of excise tax on cosmetic procedures, RMC No. 04-2018 prescribed manual filing and payment. Taxpayers had to fill in the applicable pre-printed form or downloaded form from the BIR website using the new tax rates, then compute the tax due.

After preparing the applicable form, taxpayers had to file and pay manually over the counter through Authorized Agent Banks under the jurisdiction of the Revenue District Office where the taxpayer is registered. This is a critical distinction: while existing excise tax forms could still be e-filed using temporary eFPS procedures, the new forms for sweetened beverages and cosmetic procedures required manual filing and manual payment during the transition period.

Deadlines, Effective Date, and System Enhancement

RMC No. 04-2018 is dated January 8, 2018. The circular was issued in connection with the implementation of the TRAIN Law excise tax changes and applied while the relevant eFPS forms were still undergoing enhancement. It did not provide a separate numeric filing deadline in the text. Instead, it supplied the interim procedure that taxpayers had to follow pending enhancement of the eFPS.

The circular also stated that once the enhanced versions of the affected forms became available in eFPS, the BIR would make an announcement through its website regarding the applicable guidelines, including whether there would be a need to amend previously filed excise tax returns in eFPS. Businesses therefore had to monitor BIR website announcements and preserve records of transition-period filings, computations, removals, and payments.

Penalties for Non-Compliance

RMC No. 04-2018 made clear that all concerned taxpayers remained responsible for ensuring that the correct excise tax due was declared and paid for each and every removal of excisable articles. The temporary filing procedure did not suspend the taxpayer’s obligation to compute correctly.

The circular further stated that the BIR had devised a system for validating the accuracy of removal declarations and excise tax payments while the eFPS forms were undergoing enhancement. Any deficiency excise taxes discovered through the validation process would be subject to all applicable penalties under existing revenue rules and regulations. This means that a taxpayer who used the temporary system incorrectly, encoded wrong removal details, used the wrong temporary ATC code, undercomputed the excise tax, or failed to pay the correct amount could still face deficiency tax findings and penalties.

Practical Steps for Taxpayers and Accounting Teams

Businesses affected by RMC No. 04-2018 should first identify whether their excise tax obligation involves an existing form or a newly introduced form. Tobacco, petroleum, automobile, and mineral product taxpayers using BIR Form No. 2200-T, 2200-P, 2200-AN, or 2200-M had to continue using eFPS with the prescribed temporary steps. Sweetened beverage taxpayers using BIR Form No. 2200-S and withholding agents for invasive cosmetic procedures using BIR Form No. 1620-XC had to prepare the applicable form manually and pay through the proper Authorized Agent Bank.

Second, taxpayers should check whether the transaction involves prepayment or advance deposit, or payment on actual removal. This distinction determines whether the taxpayer uses the prepayment or advance deposit field, or the actual removal workflow through Schedule 1.

Third, businesses should maintain detailed internal records of all removals, tax computations, ATC codes used, eFPS submissions, payment confirmations, manually filed forms, and bank payment records. Because the BIR expressly referred to validation of removal declarations and payments, documentation is the taxpayer’s first defense in any later deficiency excise tax issue.

Fourth, management should ensure that tax personnel are not merely relying on default eFPS computations during transition periods. Where the system has not yet incorporated revised tax rates or new forms, the taxpayer must independently determine the correct tax due based on applicable law and BIR guidance.

How Ablola, Saribong & Gueco Can Help

RMC No. 04-2018 is a reminder that BIR system limitations do not excuse incorrect tax filing, underpayment, or poor documentation. For businesses dealing with excisable articles, the risk is not limited to the filing screen; the real exposure arises when removal declarations, tax computations, payment records, and BIR validation results do not match.

Ablola, Saribong & Gueco advises Philippine businesses, CFOs, accounting departments, and in-house counsel on BIR compliance, excise tax filings, TRAIN Law implementation issues, deficiency tax assessments, and tax audit defense. If your company handles tobacco products, petroleum products, automobiles, mineral products, sweetened beverages, cosmetic procedures, or other regulated transactions requiring careful BIR compliance, our Makati-based tax and business law team can help review your filings, strengthen your documentation, and respond to BIR issues before they become costly disputes. Visit MakatiLawFirm.com to consult Ablola, Saribong & Gueco on BIR compliance and tax controversy matters.


Leave a Comment

Your email address will not be published. Required fields are marked *