RR No. 24-2018 sets the DENR-EMB documents needed for EV excise tax exemption and 50% hybrid vehicle excise tax treatment.

Automobile manufacturers, assemblers, and importers claiming excise tax relief for electric or hybrid vehicles must now support the claim through DENR-EMB documentation before the vehicle is removed from the manufacturing plant or released from customs custody. RR No. 24-2018 changes the practical compliance route: purely electric vehicles remain exempt from automobile excise tax, while hybrid vehicles are subject only to fifty percent (50%) of the applicable automobile excise tax rates, but the BIR determination will be based on the Certificate of Non-Coverage or Certificate of Conformity issued by the DENR-Environmental Management Bureau.

What RR No. 24-2018 Changed

RR No. 24-2018 further amended Section 9 of Revenue Regulations No. 25-2003, as previously amended by RR No. 05-2018, in relation to the excise tax treatment of hybrid electric vehicles and purely electric vehicles under Republic Act No. 10963, also known as the Tax Reform for Acceleration and Inclusion or TRAIN Law.

The core rule is direct and commercially important: purely electric vehicles are exempt from the excise tax on automobiles, while hybrid vehicles are subject to fifty percent (50%) of the applicable excise tax rates on automobiles. For businesses importing, manufacturing, assembling, pricing, selling, or financing vehicles, this classification affects landed cost, tax computation, pricing strategy, customs release planning, and documentary compliance.

The most important procedural change is that the BIR will no longer rely on a separate DOE inspection or validation process as the principal basis for identifying whether the vehicle is a hybrid electric vehicle or a purely electric vehicle. Instead, the regulation adopts the existing DENR system for new locally manufactured or imported motor vehicles. This avoids duplication because DENR-EMB already issues documentation containing vehicle model, make, technical specifications, and fuel-feed classification.

Who Is Most Affected

RR No. 24-2018 most directly affects motor vehicle manufacturers, assemblers, and importers dealing with new locally manufactured or imported hybrid electric vehicles and purely electric vehicles. It also matters to vehicle distributors, dealers, fleet purchasers, corporate procurement teams, accounting departments, customs brokers, tax managers, and CFOs who need to confirm whether the claimed excise tax exemption or reduced excise tax treatment is properly supported before release or removal of the automobiles.

For automotive businesses, the relevant Google search issues are likely to be RR No. 24-2018 electric vehicle excise tax exemption, hybrid vehicle 50% excise tax Philippines, DENR Certificate of Conformity hybrid vehicle BIR, Certificate of Non-Coverage electric vehicle excise tax, and BIR ELTRD requirements for EV and HEV importers. These are not merely technical search terms; they point to the exact documents businesses must secure to avoid delays in customs release or errors in excise tax treatment.

Required Documents for Hybrid Electric Vehicles

For hybrid electric vehicles, the Commissioner of Internal Revenue, through the Chief of the Excise Large Taxpayer Regulatory Division or ELTRD, shall require the motor vehicle manufacturer, assembler, or importer to present or submit the Certificate of Conformity issued by the DENR-Environmental Management Bureau.

The Certificate of Conformity must contain information on the vehicle model or make, other technical specifications or information, and the corresponding classification on fuel feed. The regulation states that from this information, it can be ascertained whether the vehicle is a hybrid electric vehicle. In practical terms, a manufacturer, assembler, or importer claiming that a vehicle should enjoy the 50% excise tax treatment for hybrid vehicles must ensure that the DENR-EMB Certificate of Conformity supports that classification.

Required Documents for Purely Electric Vehicles

For purely electric vehicles, RR No. 24-2018 requires a different document. If the subject of the application for a Certificate of Conformity is a purely electric vehicle, a Certificate of Non-Coverage must be presented to the ELTRD instead of a Certificate of Conformity.

The Certificate of Non-Coverage must state that the vehicle applied for is a purely electric vehicle and has no tailpipe emission, and is therefore not covered by Republic Act No. 8749, the Philippine Clean Air Act. This is the document the BIR will use as basis to determine whether the purely electric vehicle is exempt from excise tax.

How the BIR Will Determine the Excise Tax Treatment

The regulation provides that the BIR shall make the determination whether the electric vehicle or hybrid electric vehicle is exempt from excise tax or subject to 50% excise tax, respectively, on the basis of the Certificate of Non-Coverage or Certificate of Conformity issued by DENR-EMB and presented by the manufacturer, assembler, or importer.

This means the BIR determination remains a tax determination, but the underlying vehicle classification will be document-driven. The business must therefore treat DENR-EMB documentation as part of its excise tax compliance file, not merely as an environmental or regulatory requirement.

Timing: Documents Must Be Ready Before Removal or Customs Release

The regulation specifically ties the requirement to the period prior to the removal of automobiles from the manufacturing plant or from customs custody. For locally manufactured or assembled automobiles, the documentation must be ready before removal from the place of production. For imported automobiles, the documentation must be ready before release from customs custody.

This timing is critical. A company that waits until the vehicle is already pending release may face avoidable delays, classification issues, or disputes over whether the exemption or reduced excise tax rate applies. For importers, the compliance team should coordinate early with suppliers, customs brokers, DENR-EMB processing, and the BIR ELTRD before shipment or release planning.

Validation of the Certificate of Conformity or Certificate of Non-Coverage

RR No. 24-2018 also addresses authenticity validation. For purposes of validating the authenticity of the Certificate of Conformity or Certificate of Non-Coverage presented by the vehicle manufacturer, assembler, or importer, DENR-EMB shall provide the BIR a certified true copy of the COC and CONC issued for new locally manufactured or imported hybrid electric vehicles or electric vehicles.

This added validation mechanism makes document consistency important. The copy presented by the taxpayer should match the certified true copy provided by DENR-EMB to the BIR. Any inconsistency in model, make, technical specifications, or fuel-feed classification can create tax and release complications.

Effectivity Date

RR No. 24-2018 provides that it shall take effect on January 1, 2018, following its complete publication in the Official Gazette or in at least one newspaper of general circulation. Businesses reviewing historical imports or removals of electric and hybrid vehicles should therefore consider the January 1, 2018 effectivity date when reviewing excise tax treatment.

Penalties and Risks for Non-Compliance

RR No. 24-2018 does not create a separate special penalty provision. However, the practical risk is significant: without the required DENR-EMB Certificate of Conformity for hybrid vehicles or Certificate of Non-Coverage for purely electric vehicles, the BIR may have no basis under the regulation to recognize the 50% excise tax treatment or the full excise tax exemption.

For finance and tax teams, the risk is not only documentary. A wrong or unsupported classification can affect excise tax computation, customs release assumptions, pricing, tax accruals, and audit exposure. The safer approach is to treat the COC or CONC as a mandatory pre-release tax document for any vehicle expected to receive favorable excise tax treatment.

Practical Steps for Businesses

Motor vehicle manufacturers, assemblers, and importers should first classify every vehicle model as purely electric, hybrid electric, or neither, based on technical specifications and fuel-feed characteristics. Second, they should secure the correct DENR-EMB document: a Certificate of Conformity for hybrid electric vehicles and a Certificate of Non-Coverage for purely electric vehicles. Third, they should prepare the documents for submission or presentation to the BIR, through the Commissioner of Internal Revenue and the Chief of the ELTRD, before removal from the manufacturing plant or release from customs custody.

Fourth, businesses should align their customs broker instructions, accounting treatment, and pricing model with the documented classification. Fifth, they should maintain a complete file showing the vehicle model or make, technical specifications, DENR-EMB documentation, and BIR submission trail. This is especially important for companies importing multiple vehicle models or using the EV or HEV tax treatment as part of a commercial pricing strategy.

How Ablola, Saribong & Gueco Can Help

Ablola, Saribong & Gueco advises businesses on BIR compliance, excise tax exposure, customs-related tax documentation, and regulatory requirements for regulated industries. For automotive importers, manufacturers, assemblers, distributors, and corporate vehicle purchasers, RR No. 24-2018 should be reviewed not only as a tax issuance but as a release-and-documentation requirement that affects cost, timing, and audit risk.

For assistance in reviewing electric vehicle excise tax exemption, hybrid vehicle 50% excise tax treatment, DENR-EMB Certificate of Conformity requirements, Certificate of Non-Coverage documentation, or BIR ELTRD submissions, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *