RMC No. 21-2020 publishes new Central Luzon minimum wage rates under Wage Order RBIII-22, affecting payroll, contractor costs, and compliance.

Employers in Central Luzon must apply the new Region III daily minimum wage rates effective January 1, 2020, after Wage Order No. RBIII-22 increased the minimum wage by β‚±20.00 per day for covered private sector workers. For businesses, this is not merely a labor cost adjustment: payroll, payslips, contractor billing, wage distortion review, and withholding tax compensation records must be aligned with the new minimum wage floor applicable to the worker’s province and sector.

What RMC No. 21-2020 Changed

RMC No. 21-2020 publishes the daily minimum wage rates in Central Luzon, Region III, under Wage Order No. RBIII-22. The wage order sets new minimum wage rates for covered workers in the private sector in the provinces of Aurora, Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales.

The central change is a β‚±20.00 per day wage increase. The increase applies upon the effectivity of the wage order and changes the legal minimum daily wage depending on the province, industry classification, and establishment size. For payroll teams, the practical compliance point is straightforward: employees paid at or near minimum wage in Region III must be reviewed against the new wage tables beginning January 1, 2020.

New Minimum Wage Rates in Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales

For the provinces of Bataan, Bulacan, Nueva Ecija, Pampanga, Tarlac, and Zambales, the new daily minimum wage for non-agriculture establishments with 10 or more workers increased from β‚±400.00 to β‚±420.00. For non-agriculture establishments with less than 10 workers, the rate increased from β‚±393.00 to β‚±413.00.

For agriculture, plantation workers in these provinces now have a minimum daily wage of β‚±390.00, up from β‚±370.00. Non-plantation agriculture workers now have a minimum daily wage of β‚±374.00, up from β‚±354.00.

For retail and service establishments, those with 10 or more workers must apply a new daily minimum wage of β‚±409.00, up from β‚±389.00. Retail and service establishments with less than 10 workers must apply a new daily minimum wage of β‚±393.00, up from β‚±373.00.

New Minimum Wage Rates in Aurora

For the Province of Aurora, the new daily minimum wage for non-agriculture workers is β‚±369.00, reflecting the β‚±20.00 increase from the prior β‚±349.00 rate.

For agriculture in Aurora, plantation workers now have a minimum daily wage of β‚±354.00, up from β‚±334.00. Non-plantation agriculture workers now have a minimum daily wage of β‚±342.00, up from β‚±322.00.

For retail and service workers in Aurora, the new daily minimum wage is β‚±304.00, up from β‚±284.00. Employers operating in Aurora should pay close attention to this separate table because the wage rates differ from the rates applicable to the other Region III provinces.

Who Is Affected

The wage order applies to all workers and employees receiving the minimum wage in the private sector in Region III, regardless of position, designation, employment status, or the method by which wages are paid. This means that the order affects regular, probationary, seasonal, project-based, and other covered workers if they are paid at minimum wage levels.

Employers most affected include SMEs and larger corporations operating in Central Luzon, especially those in manufacturing, agriculture, retail, service, construction, security, janitorial, and labor-intensive businesses. Corporate accountants and CFOs should also treat RMC No. 21-2020 as a payroll compliance trigger because any wage increase may affect compensation expense, payroll accruals, pay slips, statutory benefit computations, and taxable compensation reporting.

The wage order does not cover household or domestic workers, persons employed in the personal service of another, and workers of Barangay Micro Business Enterprises with Certificates of Authority under Republic Act No. 9178.

Effective Date and Payroll Deadline

Wage Order No. RBIII-22 was approved on November 27, 2019. It was published on December 17, 2019, and took effect on January 1, 2020. Employers should therefore treat January 1, 2020 as the compliance cut-off for applying the new Central Luzon minimum wage rates.

The increase is based on the normal working hours of not more than eight hours per day. Workers paid by results, including piecework, takay, pakyaw, or task basis workers, are entitled to receive the prescribed increase per eight hours of work per day, or a proportion thereof if working for less than eight hours.

Special Rules for Apprentices, Learners, and Disabled Workers

Apprentices and learners must receive at least 75% of the prescribed minimum wage rate under Section 1 of the wage order. Existing recognized learnership and apprenticeship agreements entered into before the effectivity of the order are automatically modified to conform to the new wage rates.

Qualified handicapped workers are entitled to receive the full amount of the new wage rates under Republic Act No. 7277, otherwise known as the Magna Carta for Disabled Persons. Employers should avoid applying a discounted wage rate to qualified disabled workers where the wage order requires the full rate.

Rules for Private Educational Institutions

Private educational institutions have a specific compliance rule. For School Year 2019-2020, the share of workers and employees in the increase in tuition fees is considered compliance with the wage order. If the share of workers and employees is less than the required increase, the employer must pay the difference starting School Year 2020-2021.

Private educational institutions that did not increase tuition fees for School Year 2019-2020 may defer compliance with the wage order until School Year 2020-2021. In all cases, however, private educational institutions must implement the prescribed wage increase starting School Year 2020-2021.

Contractors, Principals, and Joint Liability

For construction projects, security services, janitorial services, and similar contracted services, the prescribed wage increase must be borne by the principals or clients of the construction or service contractors. The contracts are deemed amended accordingly to reflect the wage increase.

If the principal or client fails to pay the prescribed increases, the construction or service contractor is jointly and severally liable with the principal or client. Businesses that use outsourced labor should therefore review service contracts, billing schedules, and payroll pass-through clauses to ensure that the β‚±20.00 daily wage increase is properly funded and documented.

Crediting of Prior Wage Increases

Wage increases granted by an employer within 90 days prior to the effectivity of the wage order may be credited as compliance. However, if the prior increase is less than the increase required by the wage order, the employer must pay the difference.

The wage order provides that CBA anniversary wage increases, merit wage increases, and increases resulting from regularization or promotion are not included for crediting purposes unless there is an agreement expressly allowing such crediting. Employers should therefore distinguish between general wage adjustments and increases granted for specific contractual, merit, regularization, or promotion reasons.

Exemptions and Appeals

Upon application and as determined by the Regional Tripartite Wages and Productivity Board, distressed establishments and establishments adversely affected by calamities such as natural or human-induced disasters may be exempt from the wage order, subject to applicable rules and regulations.

Any party aggrieved by the wage order may file a verified appeal with the Commission through the Board within 10 calendar days from publication of the order. The filing of an appeal does not stay the wage order unless the appealing party files an undertaking with surety satisfactory to the Commission for payment of the corresponding increase to affected employees if the order is affirmed.

Penalties and Complaints for Non-Compliance

A person, corporation, trust, firm, partnership, association, or entity that refuses or fails to pay the prescribed wage rates is subject to the penal provisions under Republic Act No. 6727, as amended by Republic Act No. 8188.

Complaints for non-compliance must be filed with the Regional Office of the Department of Labor and Employment having jurisdiction over the workplace. These complaints are subject to the mandatory 30-day conciliation and mediation process under the Single Entry Approach, or SEnA. If settlement fails, the case proceeds to enforcement under Articles 128 and 129 of the Labor Code, as amended.

Wage Distortion and Labor Relations Compliance

If the wage increase creates a significant wage distortion, the employer and the union must negotiate to correct the distortion through the grievance procedure under their Collective Bargaining Agreement. If unresolved, the dispute must be decided through voluntary arbitration within 10 calendar days from the time the dispute is referred to voluntary arbitration.

If there is no collective bargaining agreement or recognized labor union, employers and workers must endeavor to correct the distortion. If unresolved, the matter must be settled through the National Conciliation and Mediation Board. If still unresolved after 10 calendar days of conciliation, it must be referred to the National Labor Relations Commission, which must conduct continuous hearings and decide the dispute within 20 calendar days from submission for compulsory arbitration.

Reporting Requirement

The wage order requires any person, company, corporation, partnership, or entity engaged in business to submit a verified itemized listing of its labor component to the Board not later than January 31, 2019 and every year thereafter in accordance with the form prescribed by the Commission. Because the date appears in the wage order as written, employers should verify the applicable implementing guidance and maintain documentary proof of annual compliance.

Practical Steps for Employers, CFOs, and Accountants

Businesses operating in Region III should immediately identify all workers paid at or near minimum wage and classify them by province, sector, and establishment size. The payroll team should then update the daily wage rate effective January 1, 2020, recompute wages for any underpaid period, and check whether differentials are due.

Companies should also review service agreements with security, janitorial, construction, manpower, and similar service providers. Since the wage order treats the prescribed increase as ultimately borne by principals or clients, contract pricing and invoices should be reconciled with the new wage rates.

For tax and accounting purposes, the new minimum wage rates should be reflected in payroll registers, payroll expense records, compensation documentation, and withholding tax files. RMC No. 21-2020 does not announce a new tax rate, but it affects the wage base that employers use in payroll accounting and compensation reporting. Common search phrases for this issuance include RMC 21-2020 minimum wage Region III, Central Luzon minimum wage 2020, Wage Order RBIII-22 rates, Aurora minimum wage 2020, and Pampanga Bulacan Tarlac Zambales minimum wage.

How Ablola, Saribong & Gueco Can Help

RMC No. 21-2020 is a reminder that BIR compliance, payroll compliance, labor standards, and contractor documentation often overlap. A wage order can affect not only employee pay, but also accounting records, withholding tax reporting, contractor pass-through costs, and labor dispute exposure.

Ablola, Saribong & Gueco assists employers, CFOs, accountants, and in-house counsel in reviewing payroll compliance, contractor arrangements, BIR-related compensation documentation, and labor standards risks. For assistance with Region III wage compliance, payroll tax documentation, or broader BIR and employment law concerns, visit MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *