RMC No. 69-2020 sets revised BIR procedures, documents, inspections, and deadlines for cancelling PTUs of CRM, POS, and sales machines.

Businesses that stop using, transfer, or upgrade a BIR-registered Cash Register Machine, Point-of-Sale machine, or similar sales machine must act quickly: the taxpayer must notify the proper Revenue District Office or Large Taxpayers Office in writing within five (5) days from the date the machine was last used or withdrawn from use. RMC No. 69-2020 matters immediately to retailers, restaurants, service businesses, franchise operators, and companies using POS systems because cancellation of a Permit to Use is now tied to standardized documents, defined inspection rules, eAccReg processing, and specific turnaround periods under RA No. 11032, the Ease of Doing Business and Efficient Government Service Delivery Act of 2018.

What RMC No. 69-2020 Changed

RMC No. 69-2020 prescribes the revised procedures for cancellation of Permit to Use for Cash Register Machines, Point-of-Sale machines, and other similar sales machines generating receipts or invoices. The key change is that the BIR standardized the cancellation process for PTU CRM/POS machines, particularly when a taxpayer withdraws a machine from use, transfers it to another branch, or modifies or upgrades existing software installed in the machine.

The cancellation must be processed by the Revenue District Office or Large Taxpayers Office having jurisdiction over the taxpayer’s business address where the machine was registered. This is important because businesses with multiple branches cannot simply deal with any BIR office for convenience. The office with jurisdiction over the registered machine handles the cancellation.

The circular also clarifies the relationship between the new cancellation procedure and prior rules under RMC No. 72-2018 and Operations Memorandum OPM-CSS-TSPMD No. 2018-08-01. RMC No. 69-2020 states that the procedures under RMC No. 72-2018 apply only to machines found during post-evaluation to have requested cancellation of PTU but whose requests were not acted upon by the concerned Large Taxpayers Office or Revenue District Office. Otherwise, the cancellation rules under RMC No. 69-2020 apply.

Who Is Most Affected

The businesses most affected are taxpayers that issue receipts or invoices through CRM, POS, Special Purpose Machines, or other similar sales machines. This includes restaurants, groceries, convenience stores, retail chains, pharmacies, salons, logistics counters, payment centers, service establishments, and franchise networks using accredited POS systems.

Large taxpayers and multi-branch businesses are especially affected because the circular addresses nationwide software deployment, branch or franchise rollouts, and registration of upgraded software through the Electronic Accreditation and Registration System or eAccReg. Companies searching for BIR cancellation PTU POS, cancellation Permit to Use CRM POS machines, eAccReg POS software upgrade, Z-reading cancellation PTU, or BIR POS machine transfer branch should treat this issuance as the governing procedure for PTU cancellation and machine-related compliance.

Five-Day Written Notice Requirement

The most urgent taxpayer action is the written notice to the concerned Revenue District Office or Large Taxpayers Office. The taxpayer must notify the office in writing of the request for cancellation of the PTU within five (5) days from the date the machine was last used or withdrawn from use.

The written request must state the reason for cancellation and other relevant machine information. RMC No. 69-2020 specifically identifies the Permit Number, Machine Identification Number or MIN, type of machine, machine serial number, brand and model, software name and/or version, and grand accumulated sales as of the last day of use of the machine.

For business owners and accounting teams, the five-day period is critical because delay in documenting the last day of use may create audit issues, especially where the BIR later compares the declared last day of use with Z-Readings, back-end reports, or cash register sales book entries.

Documents Required for PTU Cancellation

The taxpayer must submit supporting documents either as attachments to the written request or to the assigned Revenue Officer at the time of machine inspection. For POS machines, the taxpayer must submit a copy of the Z-Reading showing the reset counter number and End-of-Day or Z-Counter Reading as of the last day of use. For CRM, the taxpayer must submit the audit tape showing the reset counter number and End-of-Day or Z-Counter Reading as of the last day of use.

The taxpayer must also submit the back-end report for POS machines or the cash register sales book page for CRM as of the last day of use. The original PTU issued and the original decal must be surrendered. The taxpayer must also provide a reprint copy of the last invoice or receipt generated as of the last day of use showing the serial number of that invoice or receipt.

Another required document is the copy of the Z-Reading, End-of-Day Report, or equivalent report showing that the sales machine was reset to zero or initialized. For new or upgraded software loaded in the same machine where the old software was installed, the taxpayer must submit a copy of the Z-Reading, End-of-Day Report, or equivalent report showing the initial reading of the newly installed software.

When BIR Inspection Is Mandatory and When It May Be Dispensed With

Actual inspection of the CRM or POS machine is mandatory when the machine is withdrawn from use or transferred to another branch of the taxpayer. During the inspection, the Revenue Officer checks the machine specifications and details against the taxpayer’s letter, requires generation of a Z-Reading as of the inspection date, and compares it with the Z-Reading submitted as of the last day of use.

The grand accumulated sales should be the same. This comparison is significant because it shows whether the taxpayer continued using the machine after the reported last day of use. For POS machines, the Revenue Officer may require the taxpayer to generate the back-end report as of the date of inspection and compare the grand accumulated sales with the Z-Reading as of the last day of use. For CRM, the Revenue Officer checks whether the Cash Register Sales Book is updated and whether the last entry corresponds to the declared last day of use.

However, inspection may be dispensed with when the transaction involves modification or upgrading of software, so as not to disrupt normal business operations, provided the conditions in the circular are met. The new or upgraded software must be set up in the same hardware or machines where the old POS software is installed. The POS machines must have existing PTUs issued through eAccReg. The new or upgraded software must be implemented, deployed, or rolled out nationwide or in branches or franchisees located in different RDOs. The changing or loading of the new or upgraded software must be implemented immediately after close of business hours.

Cancellation Certificate and BIR Processing Deadlines

RMC No. 69-2020 imposes specific processing periods aligned with the BIR Citizen’s Charter. The Cancellation Certificate must be issued within seven (7) days from receipt of the taxpayer’s letter request by the concerned RDO or Large Taxpayers Office.

Where inspection of the machine is dispensed with, the Cancellation Certificate must be issued within three (3) working days from receipt of the complete requirements by the RDO or concerned Large Taxpayers Office. Separately, the concerned Large Taxpayers Office or RDO must approve the application for PTU through eAccReg within three (3) days from receipt of the application.

These deadlines are important for companies implementing POS software upgrades, nationwide rollouts, or branch transfers because downtime or uncertainty in machine authorization can affect sales operations, invoicing, and tax compliance.

Special Rule for Simultaneous Registration of New or Upgraded Software

To allow simultaneous registration in eAccReg of new accredited software or upgraded software installed in the same machine while the old software is being cancelled, the taxpayer must secure written approval from the concerned Large Taxpayers Office or RDO. The approval allows the taxpayer to add a distinct prefix or suffix to the serial number of the sales machine so the new software can be registered using the machine serial number followed by the prefix or suffix, such as 123456A.

This is particularly relevant for businesses replacing or upgrading POS software without replacing the hardware. Without this step, the same machine may face registration issues in eAccReg because the old software PTU and new software registration must be distinguished.

Penalties for Non-Compliance

RMC No. 69-2020 does not prescribe a new fixed penalty amount in the text of the circular. However, it expressly directs the assigned Revenue Officer to impose penalties for any violation pertaining to the use of CRM or POS machines that may be found during inspection.

Importantly, non-payment of penalties at the time of the request for cancellation of the PTU shall not be a ground for non-issuance of the Cancellation Certificate. This means that the BIR may proceed with cancellation even if penalties are assessed, although the taxpayer remains exposed to the consequences of any CRM/POS violation discovered during inspection.

Practical Steps for Businesses

Businesses should treat the last day of use of a CRM or POS machine as a formal compliance event. Accounting and operations teams should immediately secure the Z-Reading, End-of-Day Report, back-end report, last receipt or invoice reprint, original PTU, and original decal. The written request should be filed with the proper RDO or Large Taxpayers Office within five (5) days from last use or withdrawal from use.

For branch transfers, businesses should expect actual inspection and ensure that the grand accumulated sales in the inspection-day Z-Reading matches the Z-Reading as of the last day of use. For CRM users, the Cash Register Sales Book must be updated, with the last entry corresponding to the declared last day of use.

For POS software upgrades, businesses should plan the rollout carefully. If the taxpayer wants the inspection requirement dispensed with, the upgrade should involve the same hardware, existing eAccReg-issued PTUs, nationwide or multi-RDO branch or franchise deployment, and loading of the new software immediately after close of business hours. Written approval should also be obtained if simultaneous eAccReg registration requires a serial number prefix or suffix.

How Ablola, Saribong & Gueco Can Help

RMC No. 69-2020 affects both tax compliance and business operations because a defective PTU cancellation process can create risks in invoicing, sales reporting, BIR inspection, and future POS registration. Ablola, Saribong & Gueco assists businesses with BIR registration, PTU cancellation, POS and CRM compliance, eAccReg concerns, branch transfers, tax audit preparation, and documentation of machine withdrawal or software upgrades.

For companies operating retail, food service, franchise, e-commerce support, or multi-branch sales operations, ASG Law can help prepare the written request, review Z-Reading and back-end documentation, coordinate with the proper RDO or Large Taxpayers Office, and manage compliance risks before they become BIR assessment issues. For assistance with BIR POS machine compliance and PTU cancellation, visit MakatiLawFirm.com.


Leave a Comment

Your email address will not be published. Required fields are marked *