RMC No. 10-2020 lets covered taxpayers use CAS and computerized books without PTU, subject to BIR documentary requirements, acknowledgement, and post-evaluation.
Businesses with pending applications for a Permit to Use computerized accounting systems, computerized books of accounts, or system components may use those systems even without the previously required PTU, provided they submit the specific compliance documents required by RMC No. 10-2020 to the appropriate TWG Secretariat of their RDO or LT Office. This matters immediately for companies that had already filed PTU applications and were waiting for technical evaluation, because the BIR shifted the process from prior permit issuance to an acknowledgement-and-post-evaluation framework.
What Changed Under RMC No. 10-2020
RMC No. 10-2020 suspended the issuance of a Permit to Use for Computerized Accounting System, Computerized Books of Accounts, and/or components thereof under RMO No. 21-2000, as amended by RMO No. 29-2002. Instead of waiting for the formal PTU before using the system, covered taxpayers are allowed to use their CAS, CBA, and/or components in the absence of the PTU, subject to the submission of prescribed requirements.
The change is rooted in Sections 232 to 235 of the National Internal Revenue Code, as amended by Republic Act No. 10963 or the TRAIN Law, and is also connected to the Anti-Red Tape Act of 2007, as amended by Republic Act No. 11032 or the Ease of Doing Business and Efficient Government Service Delivery Act of 2018. For businesses, the practical effect is that the BIR is reducing the bottleneck caused by pending PTU applications while still preserving the BIR’s ability to evaluate system compliance after use.
The most important operational change is this: a covered taxpayer may begin or continue using its CAS, CBA, or covered system component without waiting for a PTU, but it must obtain an Acknowledgement Certificate from the TWG Secretariat. That certificate must contain a Control Number, and that Control Number must be indicated or reflected on the face of the principal and/or supplementary receipts or invoices generated from the system in order to authorize the use of such receipts or invoices.
Who Is Affected
RMC No. 10-2020 primarily affects taxpayers with pending applications for PTU of CAS, CBA, and/or system components that were filed with the National Accreditation Board and assigned to the Technical Working Group for evaluation as of the effectivity of the circular. These include corporations, SMEs, large taxpayers, branches, and other registered business establishments that use computerized accounting records, system-generated books of accounts, and system-generated receipts or invoices.
The circular is especially important for businesses searching for BIR CAS PTU suspension, computerized accounting system permit to use, BIR acknowledgement certificate CAS, computerized books of accounts requirements, and system-generated receipts control number. CFOs, accountants, tax managers, and in-house counsel should determine whether their company’s pending application falls within the coverage of RMC No. 10-2020 and whether the required documents have been submitted to the correct RDO or LT Office.
The circular also covers all pending applications for PTU of CAS, CBA, and/or components that have already undergone system demonstration. For those applications, the dockets, including the findings, are to be turned over by the National Accreditation Board to the respective TWG of the RDO or LT Office having jurisdiction over the taxpayer’s place of business for validation during post-evaluation.
Key Compliance Requirements and Documents
To use the CAS, CBA, and/or components without the required PTU, the taxpayer must submit the required documents to the TWG Secretariat of the RDO or LT Office where the taxpayer is registered, as created under RMC No. 49-2019. The first required document is a duly accomplished and notarized Sworn Statement, using Annex “A,” with the attached Summary of System Description, Commercial Invoice/Receipts/Document Description, Forms/Records and Reports Specification, using Annex “A-1.” This must be executed and signed by the taxpayer or the company’s authorized representative.
The authority of the representative must also be supported by the applicable Special Power of Attorney, Board Resolution, or Secretary’s Certificate stating such authority. For corporate taxpayers, this is not a minor formality. The BIR is specifically requiring proof that the signatory has authority to bind the company in relation to the CAS, CBA, and/or system component compliance filing.
The second required submission is a sample print copy of system-generated principal and supplementary receipts or invoices, as defined under Section 2 of Revenue Regulations No. 18-2012, showing compliance with Revenue Regulations No. 16-2018, if applicable. Businesses using system-generated official receipts, sales invoices, billing statements, or supplementary commercial documents should verify that their formats comply with the applicable invoicing and receipting rules.
The third required submission is a sample print copy of system-generated books of accounts. The circular gives examples, including the General Journal, General Ledger, Sales Journal, Purchase Journal, Inventory Book, Cash Receipts Book, and Cash Disbursements Book. These system-generated books must reflect the mandatory fields stated in Revenue Regulations No. 9-2009, if applicable.
Acknowledgement Certificate and Three-Working-Day Issuance
Once the taxpayer submits the required documents, the TWG Secretariat of the RDO or LT Office where the taxpayer is registered must prepare and issue an Acknowledgement Certificate in the format prescribed under Annex “B.” RMC No. 10-2020 states that the certificate must be issued within three working days from receipt of the requirements.
The Acknowledgement Certificate must bear a Control Number. That Control Number must be indicated or reflected on the face of the principal and/or supplementary receipts or invoices generated from the systems. This is a critical compliance point because the circular expressly states that the Control Number authorizes the use of such receipts or invoices.
Taxpayers should not treat the suspension of the PTU requirement as a complete removal of BIR controls over computerized accounting systems. The system may be used without the PTU only within the framework of the circular: submission of the required documents, issuance of the Acknowledgement Certificate, and reflection of the Control Number on the system-generated receipts and invoices.
Loose-Leaf Books of Accounts
RMC No. 10-2020 distinguishes computerized accounting systems and computerized books from loose-leaf books of accounts. If the taxpayer chooses to maintain loose-leaf books of accounts, the application for loose-leaf books will continue to be processed by the RDO having jurisdiction over the taxpayer, pursuant to RMC No. 68-2017.
This means businesses should not assume that all book-of-account registration processes were suspended. The relief under RMC No. 10-2020 is directed at PTU applications for CAS, CBA, and/or components. Loose-leaf books remain subject to the applicable processing rules under the existing issuance cited in the circular.
Post-Evaluation and Audit Risk
RMC No. 10-2020 does not specify a separate monetary penalty for non-compliance with its documentary requirements. However, it expressly provides that all CAS, CBA, and/or components used without the required PTU are subject to post-evaluation to check compliance with existing revenue issuances.
The post-evaluation may be conducted simultaneously with the audit of the taxpayer’s books of accounts and other accounting records pursuant to a Letter of Authority. For CFOs and corporate accountants, this is the key risk point: the ability to use the system before PTU issuance does not mean the system will be accepted automatically in a later tax audit. The BIR may still review whether the computerized records, receipts, invoices, books, forms, and reports comply with applicable revenue issuances.
The circular also states that a separate revenue issuance will be issued in coordination with the Assessment Service of the Bureau regarding the post-evaluation. Businesses should therefore maintain complete copies of their submissions, system specifications, representative authority documents, sample receipts and invoices, books of accounts, and any BIR acknowledgement issued under the circular.
System Enhancements, Modifications, and Upgrades
RMC No. 10-2020 imposes a specific notification requirement for system changes. If there is any system enhancement, modification, or upgrade of the CAS, CBA, and/or components, and the change will result in a change of version number and/or system release, the taxpayer must inform in writing the TWG Secretariat of the RDO or LT Office where the taxpayer is registered.
The written notification must be accompanied by a matrix showing the comparative changes between the current system and the upgraded system. This requirement is important for companies that regularly update accounting software, ERP modules, invoicing systems, or reporting components. Version changes and system releases should be coordinated with tax and accounting teams before implementation so that the required written notice and comparative matrix can be prepared.
Effective Date
RMC No. 10-2020 is dated February 6, 2020. It states that it takes effect fifteen days after publication in any newspaper of general circulation. Because the publication date is not stated in the circular, taxpayers should verify the actual publication date in the official BIR or newspaper record before computing the precise effective date for historical compliance purposes.
Practical Steps for Businesses
Businesses with pending PTU applications for CAS, CBA, or components should first confirm whether the application was filed with the National Accreditation Board and assigned to the Technical Working Group for evaluation as of the effectivity of RMC No. 10-2020. If covered, they should prepare the notarized Sworn Statement, the Summary of System Description and related specifications, the authority document for the signatory, sample system-generated receipts or invoices, and sample system-generated books of accounts.
Second, the documents should be submitted to the TWG Secretariat of the RDO or LT Office where the taxpayer is registered. The taxpayer should monitor the issuance of the Acknowledgement Certificate within three working days from receipt of the complete requirements and ensure that the Control Number is reflected on the principal and/or supplementary receipts or invoices generated from the system.
Third, businesses should prepare for post-evaluation. Accounting teams should keep system documentation updated, preserve audit trails, validate mandatory fields in computerized books, and align invoice and receipt formats with the relevant revenue regulations. Companies should also adopt an internal protocol requiring legal or tax review before any CAS, CBA, invoicing, receipt, or accounting module upgrade that changes the version number or system release.
How Ablola, Saribong & Gueco Can Help
RMC No. 10-2020 gives businesses operational relief from the PTU bottleneck, but it also shifts the compliance burden to proper documentation, accurate system-generated receipts and books, and readiness for post-evaluation during audit. Ablola, Saribong & Gueco assists corporations, SMEs, accounting teams, and in-house counsel in reviewing CAS and CBA compliance, preparing BIR submissions, drafting board or secretary’s certificates, and responding to BIR audit or post-evaluation issues.
For assistance with BIR CAS compliance, computerized books of accounts, system-generated invoices and receipts, or tax audit readiness, contact Ablola, Saribong & Gueco through MakatiLawFirm.com.